Register free!

The Green Industry's Resource Center

Thread Tools   Display Modes
Prev Previous Post   Next Post Next
Old 04-17-2000, 12:20 PM
lawrence stone's Avatar
lawrence stone lawrence stone is offline
Join Date: Jan 2000
Location: anthracite valley, commonwealth of pennsylvania Winter residence: Charlotte County FLA
Posts: 2,079
grass cape wrote:<p>&gt;I have the toro steerable sulky on my gear drive.<br>I am on the second transmission, and <br>6th set of belts<br>400hrs.<p>400 hours is just about right. The needle bearings for the input shaft takes a holiday.<br>But the are not too costly and easily replaced. What happens is the tranny input shaft becomes SO loose that the traction belt<br>jumps right off the tranny input shaft drive pulley.<p>I HAD one of the those self steering sit down<br>sulkys. I bought one ten years ago with a new WB. Because of the steering mech hung so low off the back of the machine it was always<br>getting hung up when unloading. <p>Try a rocket wheels sulky.<p>I hope you saved some of the belts instead of throwing them away. If you adjust the<br>complete handle forward you will pick up <br>adjustment on the upper tension rods and<br>will pick up another inch of belt usage.<p>By adjusting the handle to it's highest position it is the easiest to operate with<br>a stand on sulky.<p>Always make sure you have a good spare tranny ready to install.<br>This keeps your downtime to a min.<br>
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012,™ - Moose River Media
All times are GMT -4. The time now is 06:53 AM.

Page generated in 0.16719 seconds with 8 queries