Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-16-2006, 10:45 AM
lb59's Avatar
lb59 lb59 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: marietta Oh.
Posts: 106
No Tilt

One of the limitations of a FEL.

Can't be tilted up or down on one side / end like a front dirt blade.

A rear blade has this same short coming.

Anyone have a solution to overcome this problem?

I need to slope the dirt away from the foundation walls of 2 buildings.

I need to drive the tractor along side of the walls not out away from them.
Reply With Quote
  #2  
Old 01-16-2006, 06:42 PM
hosejockey2002's Avatar
hosejockey2002 hosejockey2002 is offline
LawnSite Bronze Member
 
Join Date: Jun 2002
Location: Auburn, WA
Posts: 1,193
You can set your tractor up with a box scraper with a hydraulic top link and hydraulic tilt that will work well for what you're describing. Go tractorbynet.com and do a search on top and tilt and you will find tons of information.
Reply With Quote
  #3  
Old 01-16-2006, 08:18 PM
RockSet N' Grade RockSet N' Grade is offline
LawnSite Silver Member
 
Join Date: Jan 2006
Location: Kaysville, Utah
Posts: 2,454
I have a Kubota 4330 (my 3rd Kubota). One of the best things I ever did was put cab operated top and tilt hydraulics on the rear. What a difference! I would never be without, and besides that, my production and quality of production is light years better. Another thing I did was get a Rezloh serrated bolt on blade for my front bucket. The bucket doesn't "skip" over ground, digging force is increased and in general the production of the machine is increased dramatically.
I use a box scraper with a screen roller on the back and can put down a finish grade like nobody's business......
Reply With Quote
  #4  
Old 01-17-2006, 08:48 PM
lb59's Avatar
lb59 lb59 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: marietta Oh.
Posts: 106
I was thinking along the lines of an adjustable plate mounted to the FEL Bucket cutting edge.
Bolt it on like a tooth bar or clamp it on like bucket forks.
Reply With Quote
  #5  
Old 01-18-2006, 01:55 AM
curt1 curt1 is offline
LawnSite Member
 
Join Date: Dec 2005
Location: Chattanooga, TN.
Posts: 4
You can buy a rear blade with manual offset, tilt and angle. A good medium duty blade will run around $1200 or more. Woods makes some nice blades, as does Midwest.

Curt
Reply With Quote
  #6  
Old 02-05-2006, 08:51 PM
gammon landscaping gammon landscaping is offline
LawnSite Senior Member
 
Join Date: Jan 2006
Location: east tennessee
Posts: 551
you don't need new stuff you just need a small leason in grading. you just need to push some dirt twards the house side and get you tractor tilted up like you need it and keep working if back from there
__________________
236 cat slip and slid
245 massy tractor
99 250 power strock ford
agri metal strawblower
more power and hand tools than i haul
Reply With Quote
  #7  
Old 02-06-2006, 02:57 AM
tylermckee tylermckee is offline
LawnSite Member
 
Join Date: Jan 2006
Location: wa
Posts: 248
Like gammon said all you gotta do is get the machine tilted at about the amount of slope you want and work the rest from there. little more work than being able to tilt just the cutting edge but it works just the same
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:29 AM.

Page generated in 0.08449 seconds with 9 queries