Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 05-11-2001, 04:34 PM
hotrod hotrod is offline
LawnSite Member
 
Join Date: May 2001
Location: Lynden Wasington
Posts: 1
Dual blades on MTD 42" mower

Theres two blades on my mower. There's a gap between them. How close can I get them so I don't get the "uncut" strip down the middle? Can anyone recommend a better "high lift" set of blades?
Reply With Quote
  #2  
Old 05-15-2001, 06:29 PM
BRL BRL is offline
LawnSite Bronze Member
 
Join Date: Jun 2000
Location: Somerset, NJ
Posts: 1,211
If you have an uncut strip in the middle after using that mower, you either have the wrong blades on there, or they are worn down or damaged. Check with the local MTD dealer or other lawnmower shop for the correct replacement. You can't adjust how close the blades get to each other, they go where they go. They are offset so that they don't touch each other while engaged, and so that they are overlapping to provide even coverage.
__________________
BRL
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:56 AM.

Page generated in 0.05621 seconds with 9 queries