|
#1
|
||||
|
||||
|
jd 757 problems
our 757 ran fine all day execept on the last lawn, has 25hp kawi. idles fine, even at full throtle fine, engage mower and it almost want to stall. air filter replace 1 week ago, fuel filter 2 wees ago, oil changed 17 hrs ago, happened really fast, do we need new plugs, wires. was wondering if it's the fuel pump.(dont even say it , YES the mower had gas) any info would help
|
|
#2
|
||||
|
||||
|
Quote:
__________________
STEVE ![]() In this Business, communication is vital, it's not an option! http://www.militarycity.com/valor/honor.html
|
|
#3
|
||||
|
||||
|
You may check your blade spindles and any idler pulleys, You may have one trying to lock up.
So you beat me to it Steve lol
__________________
Quote:
![]() "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
#4
|
||||
|
||||
|
Quote:
the last one was supposed to be an improved part, but it still dont have a zerk so i doubt it will last. thats a JD weak link.
__________________
STEVE ![]() In this Business, communication is vital, it's not an option! http://www.militarycity.com/valor/honor.html
|
|
#5
|
||||
|
||||
|
well now i know it not the deck went and pulled the belt, started it up idled fine, clutch engaged fine and still ran fine.disengaged clutch went to full throtle and runs like sh.. almos like choke is on, pulled air cleaner off, choke is not closed... carb need cleaning? mabey jets need adj. or replace... any more thoughts..
|
|
#6
|
||||
|
||||
|
Quote:
I haven't had any problems with my kawi other than plugs. and the JD bearings.
__________________
STEVE ![]() In this Business, communication is vital, it's not an option! http://www.militarycity.com/valor/honor.html
|
|
#7
|
||||
|
||||
|
Oh, by the way, How many hours on this motor? Valve adjust?
__________________
STEVE ![]() In this Business, communication is vital, it's not an option! http://www.militarycity.com/valor/honor.html
|
|
#8
|
||||
|
||||
|
975 hrs. could need valne adj now that i think of it but also with this many hous could need a new mower, there are probably a lot of things it needs done. we are kind of lucky i guess this is the first problem with it. never had a prob with bearings or spindles.
|
|
#9
|
||||
|
||||
|
Quote:
I did have a major loss of power from a bad plug that only seemed to miss under load. also, check that the air flow through the shrouds is clear. My manual says every 300 hours for a valve adjust.
__________________
STEVE ![]() In this Business, communication is vital, it's not an option! http://www.militarycity.com/valor/honor.html
|
|
#10
|
||||
|
||||
|
Where are you Rob? Need more input from you.
__________________
STEVE ![]() In this Business, communication is vital, it's not an option! http://www.militarycity.com/valor/honor.html
|
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|






STEVE 








Linear Mode
