The Green Industry's Resource Center

Thread Tools   Display Modes
Old 09-21-2006, 02:59 AM
TPLawnPro's Avatar
TPLawnPro TPLawnPro is offline
LawnSite Senior Member
Join Date: Sep 2006
Location: South Louisiana
Posts: 424
Enclosed Trailer Flooring Options...

I am about to spend this weekend installing my Trimmer Trap equipment racks in my trailer. My biggest concern is what to do about protecting the flooring of my enclosed trailer. Right now, the floors are still just bare plywood.

A friend of mine installed thin steel diamond tread plate in our last trailer. It worked very well, but now he is too busy with other work to take on the task again.

I'm not too sure about having a spray-on liner put in? Please correct me if I am wrong, but it seems like it might be too permanent.

On the other hand, I found a product through JNK products - BLT G-Floor "Trailer Floor Covering". Here's the link:

Does anyone else have any altenative solutions for enclose trailer floor protection? If so, I would appreciate your suggestions or recommendations.
Reply With Quote
Old 09-21-2006, 04:25 AM
Chop Stuff Up's Avatar
Chop Stuff Up Chop Stuff Up is offline
LawnSite Senior Member
Join Date: Aug 2006
Location: Newark DE
Posts: 466
if it is just laying there it will probably move all around and curl up under your mower deck, tires, etc
I've been an independent transportation/logistics company since '06.
Reply With Quote
Old 09-21-2006, 09:08 AM
mr.we.mow.grass mr.we.mow.grass is offline
LawnSite Member
Join Date: Oct 2005
Location: olive branch,ms
Posts: 47
get you some shagg carpet and put in it! just joking! let me know I have a enclosed trailer as well I am thinking about installing something in it.
Reply With Quote
Old 09-21-2006, 11:17 AM
Prestige-Lawncare's Avatar
Prestige-Lawncare Prestige-Lawncare is offline
LawnSite Senior Member
Join Date: Apr 2006
Location: Central Indiana - GO COLTS
Posts: 753
I plan on having Line-X put on the floor of my new enclosed trailer when I get it this winter. I have it in the back of my truck and love it! So much better then having a plastic bed liner in the truck, and many, many times more protective and durable.

The problem I see with the cover you linked to was that it would be just like a plastic bed liner. It's not sealed to the floor, therefore moisture and such can and will get under it, and then almost never dry out, causing the flooring to rot even faster then if it weren't covered at all.

I read on another thread on here somewhere that many trailer warranties are void from gas and oil spills on the flooring.

Spray on liner? The best choice as far as I can see.
I use Xtreme Series Racks, the most advanced racks on the market. Check them out at:

Proud Supporter of:
Hustler mowers ~ Xtreme racks ~ STHIL products
Reply With Quote
Old 09-21-2006, 05:52 PM
nt1 nt1 is offline
LawnSite Senior Member
Join Date: Oct 2004
Location: Dallas, Texas
Posts: 297
What about a second layer of sacrificial plywood? Maybe tongue and groove plywood and some screws. Then use it and abuse it and when it wears out, remove and replace it.
Reply With Quote
Old 09-21-2006, 08:10 PM
TPLawnPro's Avatar
TPLawnPro TPLawnPro is offline
LawnSite Senior Member
Join Date: Sep 2006
Location: South Louisiana
Posts: 424
All great ideas.

Check this out. Based on some of your ideas, I think what I am going to do is put down some 1/4" thin Hardi-backer board over the plywood, screw it down, and then maybe have the backer board floor surface spray-coated with Line-X.

What do you all think about this option?

Sounds like it might be a little expensive, but the Hardi-backer is highly moisture resistent, plus it adds strength to the existing plywood floor. Then the Line-X resists the wear and tear, and spills of gasoline,oil, etc.
Reply With Quote
Old 09-21-2006, 10:34 PM
mrusk mrusk is offline
LawnSite Gold Member
Join Date: May 2003
Location: northern jersey
Posts: 3,260
I bought a garage floor 2 part epoxy for my trailer and it is holding up great. I could not justify spending 1200- 1500 for linex on my floor when the plywood for it proably only cost 200-250.

Reply With Quote
Old 01-21-2009, 12:04 PM
CoupesCuts's Avatar
CoupesCuts CoupesCuts is offline
LawnSite Member
Join Date: Aug 2005
Location: Carmel, NY
Posts: 208
Here's a bump for an old thread that I want to renew because I have the same question. I'm looking into different options for flooring my new enclosed trailer. I have looked into Line-X and Linoleum. Any other suggestions? I used a linoleum remnant from Dome Hepot in my old trailer and it's cracking and tearing. What did you use in your trailer?
Reply With Quote
Old 01-21-2009, 03:19 PM
DoetschOutdoor DoetschOutdoor is offline
LawnSite Bronze Member
Join Date: Aug 2005
Location: S. IL
Posts: 1,826
2 coats of the roll in bedliner available from any parts store. I got a new enclosed middle of last year, put the bedliner on the day I got it and its been holding up great since. The trailer has been used for regular mowing and other tasks and Im very happy with it so far. The roll on products are not as thick at the line x would be but then again it really doesnt need to be. I went about 2foot up the sides of the walls as well.
Reply With Quote
Old 01-21-2009, 04:44 PM
South Florida Lawns's Avatar
South Florida Lawns South Florida Lawns is offline
LawnSite Platinum Member
Join Date: Apr 2005
Location: usa
Posts: 4,786
Are you ready to throw down some serious $$ for your trailer floor? I was quoted $2500 to get mine Line-X sprayed. I ended up priming it and then used an epoxy paint for wood decks and I think it turned out great. I bought a bag of sand and threw it over the wet paint on the ramp, and now I won't slip. I think I spent around $50 including sanding belts primer brushes and the paint. It ain't the toughest thing around but it sure looks good and its easy to touch up.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 08:13 PM.

Page generated in 0.09524 seconds with 11 queries