Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-24-2001, 08:48 PM
stslawncare stslawncare is offline
LawnSite Bronze Member
 
Join Date: Jun 2000
Location: DE
Posts: 1,474
update

hey guys just wanted to update u on my trailer project and ask a few questions.

i have gotten a big piece of diamond plate for free in new condition, its about 10x3. my trailer is 8x6, how do i go about cutting it? i feel this will be great to have on the deck for a few reasons. one for looks, two for traction, three for easy cleaning up of mud. has anyone else tried this?

i am planning on putting pvc on the front of my trailer (attach to front board which is 3' high), i was considering putting one on an angle on the corner, the bottom being towards the middle of the trailer and the top being at the front, allowing quick access to the most used tools instead of climbing in trailer for the others, would have one on each side. whats everyone thing?
__________________
Scottie
STS Lawn Care
Nutra Soils Inc. ( www.nutrasoils.com )
Reply With Quote
  #2  
Old 09-25-2001, 03:03 AM
LAWNGODFATHER LAWNGODFATHER is offline
LawnSite Fanatic
 
Join Date: May 2001
Location: St. Louis, Missouri Gateway to the west
Posts: 6,750
First off Scotty, have you ever ran a shovle over diamond plate, not fun. If you put a mower on it when it is wet, it will be very slipery. Your second idea is good. What size though?

about the cutting ask them http://www.lawnsite.com/forumdisplay...=21&daysprune=

LGF:blob1:
Reply With Quote
  #3  
Old 09-25-2001, 03:10 AM
Highpoint Highpoint is offline
LawnSite Member
 
Join Date: Oct 2000
Location: Columbia, Mo
Posts: 153
Cuttin Diamonds

The cats meow would be to use a Plasma Cutter. Us poor folk use a Sawsall with a high quaility metal blade. Good luck!
__________________
We're GROWING to be the best!
Reply With Quote
  #4  
Old 09-25-2001, 03:43 AM
Guido Guido is offline
LawnSite Silver Member
 
Join Date: Feb 2000
Location: North Las Vegas, Nevada
Posts: 2,085
Sawsall

Will cut it just fine, and then grind off the two edges you cut a bit.
Reply With Quote
  #5  
Old 09-25-2001, 08:54 AM
stslawncare stslawncare is offline
LawnSite Bronze Member
 
Join Date: Jun 2000
Location: DE
Posts: 1,474
hey, not sure how long the diagonal pvc would be, i would assume about 4'? the straight ones on the front will be 3'. so sawzaw will cut diamond plate?
__________________
Scottie
STS Lawn Care
Nutra Soils Inc. ( www.nutrasoils.com )
Reply With Quote
  #6  
Old 09-25-2001, 08:57 AM
AltaLawnCare's Avatar
AltaLawnCare AltaLawnCare is offline
LawnSite Senior Member
 
Join Date: Dec 2000
Location: Altavista, VA Transition Zone 7
Posts: 962
Sawzall with a sharp blade is the way to go. A plasma cutter will leave a jagged edge, not as bad as a torch, but similar.

You cuold also add traction tape to areas you're stepping on.
__________________
.... Billy


Altavista Lawn Care
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:48 AM.

Page generated in 0.08157 seconds with 9 queries