Register free!

The Green Industry's Resource Center


 
 
Thread Tools   Display Modes
  #1  
Old 07-31-2007, 04:13 PM
farmall200 farmall200 is offline
LawnSite Member
 
Join Date: Jul 2007
Location: Tennessee
Posts: 2
breather tube hose barb

I have an 18/44 FasTrak that's about due for new oil and filters in the IZT's. Can someone give me a source for the plastic hose barb that supports the IZT breather tube? Another possibility is that I could order it from Hydro Gear if I can get the Hydro Gear part number. It is not a standard NPT fitting.

One of these broke when I checked and added oil a while back, evidently cracked from vibration during use since it broke as I was removing it by hand. Hustler only sells these barbs as part of the breather hose assembly at $32 plus tax each. That makes for expensive oil changes.

It's a great machine and this has been my only problem with it in almost 2 years of use.
  #2  
Old 08-01-2007, 12:27 PM
homemower homemower is offline
LawnSite Member
 
Join Date: Aug 2005
Location: Ray,Mi
Posts: 34
breather tube IZT

Mine broke also if you use an air chuck preferably the long type and put a new o-ring on. The threads are the same just don't over tighten it; ie hand tighten only; it works perfectly you will need a new tube I used 3/8 air line
which you would want to replace at each oil change. The oil in the rubber hose will break it down after a long exposed time but it is made for a small amount of oil all the time, as used in air tools. It works better than the ones that come from the factory. If not you can also go to Tractor Supply and ask for the Polypropelene fittings and find one there,Warning it will break also as it is the same material as what came in your Fastrack.
  #3  
Old 08-01-2007, 01:50 PM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,755
I have tried to attach the service and parts manual from Hydro Gear, it has everything you need in it, but the file is to large.
E-mail me and I will e-mail it back to you.

Pj
__________________
  #4  
Old 08-03-2007, 09:43 PM
farmall200 farmall200 is offline
LawnSite Member
 
Join Date: Jul 2007
Location: Tennessee
Posts: 2
I got the H-G pdf file, Pj. Thanks for those suggestions, Homemower. I'll check them all out next week. That's 3 more possibilities than I had before. Thanks to you both.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 03:31 PM.

Page generated in 0.07071 seconds with 10 queries