Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #11  
Old 09-06-2007, 08:28 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,761
Quote:
Originally Posted by CamLand View Post
I'll be trying the rest on Friday and post outcome...but so we all know I have 2 small terminals...
Yes I seen that,
What you can do is check for power on one of these two small terminals with the key held in the start position. If you have power to one this will eliminate any wiring harness problems with the supply power.

Move to the other wire that had no power in the start position and put a jumper wire from it to any frame/engine ground, Doing this should spin the engine over with the key.

This will tell you there is a problem in the ground circuit in which the safety switches function on.

This is where a multimeter would come in handy to test the seat switch for opening and closing functions with the meter set to ohm's scale.

The park brake switch will function as two wires with a closed circuit and the other two open circuit, When the switch plunger is pushed in these wires (readings) will flip flop. The two that were closed before will now be open and the two that were open will be closed.
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!

Last edited by Restrorob; 09-06-2007 at 08:35 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:38 PM.

Page generated in 0.05655 seconds with 9 queries