|
#1
|
||||
|
||||
|
Hydro Oil Change
How do I go about changing ALL the fluid in the HYDRO system of my walk behind. Bought it about a month ago with white fluid. I know this means water has gotten into the system. How do I change it and what do I use?..
Thanks
__________________
|
|
#2
|
||||
|
||||
|
__________________
Quote:
![]() "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
#3
|
||||
|
||||
|
Ahh.... Lesco 36 w/ Kawasaki
__________________
|
|
#4
|
||||
|
||||
|
The easiest way without removing hoses and risking leaks and possible contamination to the system is drain the tank and filter then re-fill with fresh oil. Do this two/three times until it stays clean, Then install a new filter.
But, Block the rear tires off the ground and run the unit full forward to full reverse slowly 8/10 times between changes to bleed any air out of the system.
__________________
Quote:
![]() "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|














Linear Mode
