Register free!
Search
 
     

Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-17-2007, 09:45 PM
Chris J Chris J is offline
LawnSite Silver Member
 
Join Date: Sep 2006
Location: Maldive Islands
Posts: 2,062
Brain Storming Time

Before I submit my proposal on this lighting job, I thought I should first solicit the ideas of my fellow lighting contractors.
I have a large project to design for a developer. Included in this proposal is a 200' bridge that spans a marsh. There are concrete borders on both sides of the lanes that are about 2.5' tall. The developer took it upon himself to have junction boxes installed every 25' along the bridge on both sides because he wants some very low light to define the drive way onto this island. Keep in mind that these lights will be surface mounted, and they will be only about 18" off the ground. He did provide conduit between j-boxes, but it is only 1/2" Sched.40 grey electrical conduit.
Here's my dilemma:
1.) What fixture can you recommend that will cover the j-box?
2.) Being that the conduit is only 1/2", what kind of wiring method would you use? There are 9 lights, spaced 25' apart on both sides. 200' from the first fixture to the last.

Looking forward to some great responses!
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 04:42 AM.

Page generated in 0.29875 seconds with 9 queries