Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 01-15-2002, 11:55 PM
LAZERMAN LAZERMAN is offline
LawnSite Member
 
Join Date: Jan 2002
Location: JONESVILLE LA
Posts: 19
GAS LEAK

ANT IT LOOKS LIKE THE BOWL GASKET IS LEAKING. BE CARFULL WHEN YOU TAKE IT APART, AND MAKE SURE YOU DONT BEND THE JET. LIKE THE OTHERS SAID TAKE THE FLOAT AND CHECK IF IT HAS AND VARNISH ON IT, IF SO CLEAN IT OR REPLACE IT. LOOK AT THE NEEDLE, IF IT HAS A WEAR RING ON THE RUBBER TIP REPLACE IT, IF IT HAS A COMPLETELY MEDAL NEEDLE REPLACE THE NEEDLE AND SEAT. WHEN YOU REPLACE OR REPAIR THE NEEDLE/SEAT TURN THE CARB UPSIDE DOWN AND WITH YOUR MOUTH BLOW AIR IN THE INLET," MAKE SURE THE FITTING IS CLEAN, GAS DON'T TASTE TOO GOOD," IF IT STILL LEAKS IT NEEDS A NEEDLE AND SEAT IF NOT PUT IT TOGETHER AND IT SHOULD BE OK.
GOOD LUCK
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:07 AM.

Page generated in 0.05863 seconds with 10 queries