Register free!

The Green Industry's Resource Center



 
 
Thread Tools   Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-23-2008, 02:11 AM
haroldchevelle haroldchevelle is offline
LawnSite Member
 
Join Date: May 2008
Location: fayetteville,ar
Posts: 5
23 kaw upper bushing out /oil leak

2001 hustler 60. kawasaki 23 hp. fh-680v-bs01.
motor failure started with a major oil leak , upper seal was pushed out and small metal frags were present (odd?) I replaced the seal and the motor ran 'ok', but the flywheel bolt "moved around "when running .so i pulled the crank out and the upper bushing was bad , i know that the dealer can't sell the bushing by itself ,without the upper block half. this motor has less than 600 hrs on it .and is in very good shape . my question is , does any one make a bushing to replace this one ? the bushing is a metal band type ,like a cam bearing , is the metal surface of the cam bearing the same as the bushing of the upper crank?
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:42 PM.

Page generated in 0.14585 seconds with 8 queries