Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 03-24-2008, 10:37 PM
lawnfreak lawnfreak is offline
LawnSite Member
 
Join Date: May 2004
Location: Hazel Green, AL
Posts: 27
Sod installation attachment eats through the tubes

I purchased a sod installation attachment for my t190 from my bobcat dealer. The machine works excellent except that it eats through the tubes that the sod is on. The tubes are made out of a thick cardboard. The sod rolls are about 36 inches wide. The attachment uses the hydraulics to clamp on to the ends of the rolls. Approxmately 90% of the rolls get torn up and it tears the edges of the sod on some of the rolls. Are there any special tricks or things that i could use to get this to stop from happening? Thanks in advanced.
Reply With Quote
  #2  
Old 03-25-2008, 01:18 AM
AWJ Services AWJ Services is offline
LawnSite Platinum Member
 
Join Date: Jun 2004
Location: Ga
Posts: 4,264
What brand did you buy?
Reply With Quote
  #3  
Old 03-25-2008, 08:35 AM
allinearth allinearth is offline
LawnSite Senior Member
 
Join Date: May 2005
Location: Arkansas
Posts: 600
I don't own one but have used one. Maybe don't clamp the roll as hard. Might help with the tube. Thought those cardboard ones were disposable. How is it tearing the sod? From rubbing onsides? Not much can be done unless it is not centered because it needs adjustment. If it is just tearing apart in the middle then there is too much tension on the roll not letting it turn. I have also noticed the roll needs to be held at just the right height. I try to stretch the sod slightly as I put it down. Have seen as much as 10% gain that. way
But if I stretch too much of course it tears.
Reply With Quote
  #4  
Old 07-27-2008, 01:23 AM
SiteSolutions's Avatar
SiteSolutions SiteSolutions is offline
LawnSite Bronze Member
 
Join Date: Apr 2007
Location: Huntsville, AL
Posts: 1,098
I had the same problem when I rented one, same setup... bobcat installer on a T-190. We ended up sticking a pvc pipe inside the cardboard tube... what a time waster. Maybe it was just that the tubes got too wet from sitting all night till I installed?

Did you ever get a solution to this?
Reply With Quote
  #5  
Old 07-27-2008, 12:07 PM
backhoe1 backhoe1 is offline
LawnSite Member
 
Join Date: Sep 2007
Location: Brookings, South Dakota
Posts: 41
simple solution: buy sod from a grower that uses plastic tubes
Reply With Quote
  #6  
Old 07-29-2008, 11:02 PM
lawnfreak lawnfreak is offline
LawnSite Member
 
Join Date: May 2004
Location: Hazel Green, AL
Posts: 27
I solved the problem by finding a steel hollow cylinder tube that i found on one of our jobsite in the trash pile. I cut it to the right size and now it works perfect. I just slide it inside the tube, pick up the roll, and go to work.
__________________
Specializing in new home landscaping and landscape renovation.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:44 AM.

Page generated in 0.07348 seconds with 9 queries