Register free!

The Green Industry's Resource Center

Thread Tools   Display Modes
Prev Previous Post   Next Post Next
Old 04-15-2002, 12:04 PM
Budman Budman is offline
LawnSite Member
Join Date: Mar 2002
Location: kentucky
Posts: 65
Belt guides on Bunton 36"

I just replaced the engine-to-deck belt on a 36" Bunton Hydro. The manual says that there should be 1/8" clearance between the belt guide and the belt when the belt is in the engaged position. However, I noticed when it is running that the belt appears to make contact with the guide when it flops back and forth while it is turning on the pulley. The pulley and the shaft are not bent. Do I need more tension on the belt, or do I just need to increase the clearance on the guide. The contact between the belt and the guide appears to be slight and intermittent, but I am concerned that it will wear the belt over time.

Thanks for your replies!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012,™ - Moose River Media
All times are GMT -4. The time now is 03:05 AM.

Page generated in 0.06324 seconds with 8 queries