Register free!

The Green Industry's Resource Center


Reply
 
Thread Tools   Display Modes
  #1  
Old 06-21-2000, 02:05 AM
country boy 710 country boy 710 is offline
LawnSite Member
 
Join Date: Jun 2000
Posts: 2
i was wondering if any one could tell me what cluch to put in an 86 k 10 4x4 with 400 sb motor i tried three diffrent ones and all three dont want to release for me
Reply With Quote
  #2  
Old 06-21-2000, 04:28 PM
Alan Alan is offline
Member
 
Join Date: Mar 2000
Location: NW Vermont (Milton)
Posts: 1,185
After three clutches I'd be looking for a problem somewhere else. Our 85 F-350 had clutch release problems which I finally traced to worn linkage between the clutch pedal and pushrod to the master cylinder. (hydraulic clutch) As I recall, the Chevy linkage is mechanical, but look for wear on the pedal pivot, all the linkage holes and the little "ball joint" thiny on the engine end of the the linkage crosshaft. Also, waht condition is the fork in?
Reply With Quote
  #3  
Old 06-21-2000, 09:01 PM
maxs383 maxs383 is offline
LawnSite Member
 
Join Date: Jun 2000
Posts: 4
if it was first clutch it would sound like pressure plate but being its your third sounds like linkage etc.... bring it to your local shop unless you want to experiment and lay your truck up for a few days...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:21 AM.

Page generated in 0.06258 seconds with 9 queries