Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-28-2000, 04:34 PM
ernie in
Guest
 
Posts: n/a
I am replacing my stick with an auto in my 78' 3/4 4x4. Question is, if using a T350, will I need a short or long shaft? Will the automatic fit up with the transfer case with no problem? Thanks again guys!
Reply With Quote
  #2  
Old 04-29-2000, 11:24 PM
yortengel yortengel is offline
LawnSite Member
 
Join Date: Mar 2000
Location: Clawson, Mi
Posts: 216
What did the transmission that you are installing, come out of? and I think the shafts are the same.
Reply With Quote
  #3  
Old 05-03-2000, 05:26 PM
4LOW
Guest
 
Posts: n/a
If you've got a 205 t/c with your stick,<br>it won't mount to your T350 without an <br>adapter(Advance adapters makes one)and <br>the splines don't match. It's easier to<br>use the case that originally came with your<br>T350, as for a driveshaft, autos use shorter<br>shafts than sticks because the overall length<br>of the trans and transfer case, is longer for<br>autos, so the rear driveshafts are a different length. The front shaft should<br>be the same length, but you need to check<br>the t/c side, some have yokes and some have<br>a flange type mount.<br>4LOW
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:01 AM.

Page generated in 0.06429 seconds with 9 queries