Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-16-2000, 08:41 PM
mlosborn mlosborn is offline
LawnSite Member
 
Join Date: Apr 2000
Location: washington state
Posts: 2
my son is working on his 78 chev, he took out a rearend that is 3.73 and is putting one in that is 3.07, he wants to know if the 3.07is going to help or hurt is fuel economy..he doesnt care I do.
Reply With Quote
  #2  
Old 04-17-2000, 09:27 AM
frahmie frahmie is offline
LawnSite Member
 
Join Date: Feb 2000
Location: Grant Park IL
Posts: 46
well, it will help fuel econmy but make it somewhat of a dog. i have an 86 chevy 4x4 with a 3.08 ratio and my acceleration/power kinda sucks. i would like to put a 3.73 in it. this is from my experiences, I`m not saying I`m right. is his truck a 4x4, because bigger tires reduces your gear ratio too, about 10% for every inch taller than stock. so the just of it is......if he is planning on a performance truck i would just leave in the 3.93.<p>frahmie
Reply With Quote
  #3  
Old 04-17-2000, 05:28 PM
yortengel yortengel is offline
LawnSite Member
 
Join Date: Mar 2000
Location: Clawson, Mi
Posts: 216
It all depends on how the truck is driven, if he spends a lot of time on the E-way it will be a help. as long as he is not trying to pull a trailer. But it will decrease the take off power.
Reply With Quote
  #4  
Old 04-19-2000, 09:21 PM
Gordo
Guest
 
Posts: n/a
How can I find out what ratio I have in my suburban? I heard that it can be done without pulling the covers & counting teeth- anyone know how?
Reply With Quote
  #5  
Old 04-19-2000, 11:10 PM
billebob billebob is offline
LawnSite Member
 
Join Date: Feb 2000
Location: Grant Park IL.
Posts: 30
Gordo,<br>Normally your sub will have a sticker on the inside of the glove box. But, if the gears have been changed you'll probly have to take off the cover, count the ring gear teeth and divide the pinion teeth by it. <br><p>----------<br>Bill Herz<br>http://members.tripod.com/mopar00
Reply With Quote
  #6  
Old 04-21-2000, 11:48 PM
yardsmith yardsmith is offline
LawnSite Senior Member
 
Join Date: Jan 2000
Location: Ohio
Posts: 626
hey there-<br>I have an 87 Silverado 4x4 with junk 305 & 3.42 gears. It's not bad, but I pull a 20 landscape trailer loaded with commercial mowers & it's a dog; esp. in the spring when I still have my 32&quot; mud tires on.<br>I'd leave the gears alone; it'll take more gas to get the engine to lug the truck up to speed, esp. if stop-&-go driving.<br>If it's a 2wd, ok. If it's a 4x4, you'll have to swap front & back axles to get the same gears in both. That's lotsa bucks.<br>One solution is taller tires; 3&quot; lift in the back & extra spring in the front of my truck totalled me about $175. That's cheap, & a 3&quot; lift looks good without having to alter driveline angles, lengthen drive shafts or brake lines, etc. With a 3&quot; lift , you could fit 33's without cutting your fenders; any taller & front tires will barely catch on corners of wheelwells. Good luck.<p>----------<br>Smitty ô¿ô<br>
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 05:12 AM.

Page generated in 0.07913 seconds with 9 queries