Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 06-15-2002, 10:33 PM
scottlawns scottlawns is offline
LawnSite Member
 
Join Date: Jun 2000
Location: MN
Posts: 144
rebuilt blower

has anyone ever rebuilt a eb630 ...i think mine seized up the other day and i was wondering if you can get new piston and rings for that and if so where do i order those?
__________________
scott jay

<a href="http://www.scottjaylawns.com">ScottJayLawns.com</a>
Reply With Quote
  #2  
Old 06-16-2002, 04:45 AM
vipermanz's Avatar
vipermanz vipermanz is offline
LawnSite Bronze Member
 
Join Date: Mar 2001
Location: Birmingham Alabama
Posts: 1,780
did ya run straight gassed??:blush:
__________________
<img src="http://img.photobucket.com/albums/v404/vipermanz/Newbanner.jpg" alt="Image hosted by Photobucket.com">
Check Out Weldingweb !!!
Reply With Quote
  #3  
Old 06-16-2002, 03:27 PM
scottlawns scottlawns is offline
LawnSite Member
 
Join Date: Jun 2000
Location: MN
Posts: 144
no i was using amsoil,and i have had great luck for years,and i use the same gas in evrything and that was the only thing that had a problem,so does anyone know if i can get parts to fix and where?
__________________
scott jay

<a href="http://www.scottjaylawns.com">ScottJayLawns.com</a>
Reply With Quote
  #4  
Old 06-16-2002, 05:40 PM
General Grounds General Grounds is offline
LawnSite Senior Member
 
Join Date: Jan 2001
Location: Manalapan,nj
Posts: 902
:blob3: scott, a piece of carbon may have broken off and this will resemble a seized motor, if the motor is siezed you can get a short block, everything is new all you have to do is put your old carb and muffler on it.
Reply With Quote
  #5  
Old 06-17-2002, 01:41 AM
scottlawns scottlawns is offline
LawnSite Member
 
Join Date: Jun 2000
Location: MN
Posts: 144
i pulled the plug and checked the carb port and ex port and did not see any scrathches,it has spark but does not start,it ran fine and when it died it just lost all power and shut down.the pull start does feel kinda stiky...maybe its a rod bearing or crank,if anyone has any ideas to check that would be great..thankyou
__________________
scott jay

<a href="http://www.scottjaylawns.com">ScottJayLawns.com</a>
Reply With Quote
  #6  
Old 06-20-2002, 06:08 PM
grasmo grasmo is offline
LawnSite Member
 
Join Date: Jun 2002
Location: fl
Posts: 34
sounds like a compression problem. i would take something flammable like carb or brake cleaner and spray it in the carb venturi. hold the throttle wide open and see if it starts. if it does let it idle and see if it shuts down (acts like it is running out of gas). if it does or it won't start i would pull the jug and look at the rings. see if they are a blackish blue color, kinda tainted. if they are replace the piston assy. (piston, rings, and brg.). this will be ok as long as the cylinder is not scored or gouged.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:04 PM.

Page generated in 0.07661 seconds with 9 queries