![]() |
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
What Model is this and what is it's Worth?
Hello, I have talked with a seller of a Gravely and gotten the following Information:
a) $750.00 or best offer b) Has a mulch kit install c) 16 HP Twin Cylinder Briggs & Stratton engine d) He bought it used from someone else for 1700.00......doesn't know if they were the original owners. e) PTO switch is loose doesn't always engage the blades. This will need to be replaced. f) Deck is fixed rather then floating but he believes that you can just pull some pins to make it floating g) Hasn't been run other then just started occasionally for a year. h) Doesn't know what model it is. i) Recent Belts What model is this, what is it worth, when was it built & what should I check before I purchase it? I have not gone to see the machine, as it is 2 hrs from me. Please let me know all you can on the above
__________________
In memory of Eric Elm |
|
#2
|
|||
|
|||
|
post a pic & see what response you get.
________________________________ you plant it, I'll maintain it |
|
#3
|
|||
|
|||
|
I don't have a picture nor will I get one unless I drive to take it. The machine is 2hrs from me and the seller doesn't have a clue about it.
Any other ideas?
__________________
In memory of Eric Elm |
|
#4
|
|||
|
|||
|
I accidentally left out the following. It has a 36" deck on it. It is definitely not a convertible tractor but a full time mower. Hopefully this will help to narrow it down.
Thank you again, Gravely_Man
__________________
In memory of Eric Elm |
|
#5
|
|||
|
|||
|
Pro Walk
It sounds like a Pro 200 Model 988081 which was made between 1995 ~ 1998. If it's in good shape it would be well worth the $750. New it sold for about $4,000.
Hand safety switches need to be checked out. If it's not been used for a while you may need to take the carb off and clean the old gas out, maybe even need to soke in carb cleaner if you have skunk gas. Other than that it is a solid unit.
__________________
Mission: Constant Never-ending Improvement |
|
#6
|
|||
|
|||
|
Thank you very much for the information. Have a great day!
__________________
In memory of Eric Elm |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 05:36 AM.
Forum Rules:
This Ariens/Gravely sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Ariens/Gravely company. This forum is provided by LawnSite.com to Ariens/Gravely in order to better server their customers