Register free!

The Green Industry's Resource Center





Reply
 
Thread Tools   Display Modes
  #1  
Old 06-11-2009, 02:39 PM
jon schuler jon schuler is offline
LawnSite Member
 
Join Date: Mar 2007
Location: michigan
Posts: 102
hate the t bar.....any solutions

I just bought a gear drive, floating deck t bar mower from my dealer. I have had pistol gears and hydros before. I wanted the turbo force deck because they are great on the zeros. In order to do so I had to get the t-bar. Anyone know if I can convert it to a pistol. Dealer said no. I would rather not try to sell it or try to get my dealer to try to get it back.
Reply With Quote
  #2  
Old 06-16-2009, 10:44 AM
The Toro Company The Toro Company is offline
Sponsor
 
Join Date: Feb 2009
Posts: 354
Jon Schuler -

Sorry, but we (Toro) have not designed this mower to be converted from one control system to another and therefore cannot endorse making such a drastic control change.

The Toro Company
Reply With Quote
  #3  
Old 06-16-2009, 10:51 AM
ron mexico75's Avatar
ron mexico75 ron mexico75 is offline
LawnSite Bronze Member
 
Join Date: May 2009
Posts: 1,478
I mean I know this is a question that doesn't change anything. But, why didn't you demo the T-BAR design before buying it? Or ask the questions you just asked to the dealer? Just sounds weird that you spent thousands of dollars on something that you dont like the controls on or weren't familiar with before you took delivery of it.
Reply With Quote
  #4  
Old 06-16-2009, 05:14 PM
brucec32's Avatar
brucec32 brucec32 is offline
LawnSite Platinum Member
 
Join Date: Jul 2001
Location: Atlanta, GA
Posts: 4,405
The t bar is conceptually the opposite from pistol grips. It's not going to be instantly comfortable. But I have used both and I can't imagine the pistol grips/ECS being easier in any way. I can one-hand a Toro T bar when it's adjusted correctly. See if you can find someone with experience on them to show you a few tricks of the trade when making tight turns and such. It's not a hydro but pretty darn close in situations that don't actually require backing up.

Proper hand positioning on the bar, palms down with the webbing of your thumbs under t bar out near the corners applying light pressure, fingers on the fixed brace bar(NOT on t bar as you will smash them if you hit a bump) works best I find. To back up on flat areas or when pointed up hills, simply apply slight pressure to neutral out and remove friction from pulleys and use your fingertips to pull the mower back. Works like a charm when you get the hang of it.

You can also one-hand the machine to prevent blades cutting off and keep it in the neutral position and use your second hand to pull the machine from the rear handlebar.
Reply With Quote
  #5  
Old 06-16-2009, 08:02 PM
THC THC is offline
LawnSite Silver Member
 
Join Date: Oct 2008
Posts: 2,020
T-bar is awesome.. belt drive not so much.
Reply With Quote
  #6  
Old 06-16-2009, 08:06 PM
LawnTamer's Avatar
LawnTamer LawnTamer is offline
LawnSite Gold Member
 
Join Date: Mar 2005
Location: Salt Lake City, Utah
Posts: 3,957
Give it a chance. I run T-bars that are gear driven and we love them, way higher productivity than with pistol grips. Once you become familiar with the system, get a sulky, mowing with it will be second nature, and almost effortless.
__________________
Evergreen of Utah
Licensed applicators since 1990
Making the desert green one lawn at a time


"No freeman shall ever be debarred the use of arms."
-Thomas Jefferson

"Both oligarch and tyrant mistrust the people, and therefore deprive them of arms." - Aristotle
Reply With Quote
  #7  
Old 07-12-2009, 05:50 PM
TXNSLighting's Avatar
TXNSLighting TXNSLighting is offline
LawnSite Fanatic
 
Join Date: Feb 2007
Location: DFW, TX
Posts: 6,460
What do you not like about it?? They are the second best walk behind controls on the market! 2nd to the T2!
__________________
Ryan

Always a lesson, never a failure.

www.meangreenlawncare.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:59 PM.

Page generated in 0.08208 seconds with 9 queries