|
#1
|
|||
|
|||
|
Maruyama
Anyone have any experience with these units and if so what do you think about their trimmers and edgers?
|
|
#2
|
||||
|
||||
|
put them up against anything... they can't be beat.... they can be matched, but not beat. Their 26 is my favirote trimmer.
__________________
Thanks for reading my signature. Sorry it isn't "witty". |
|
#3
|
||||
|
||||
|
I know several dealers that say they build the best hedge trimmers on the market, but many do not carry them because of the demands of the company and parts. I have looked at several of their products at trade shows and they seem to be soild build pieces of equipement. The trouble that I have with them is the same problem I have with Tanaka, there is not a big dealer network, [at least in my area].
|
|
#4
|
|||
|
|||
|
i use maruyama hedge trimmers and they are real good!! ive been pleased so far
|
|
#5
|
||||
|
||||
|
the best of the best, my bc260 mury lasted 17 yrs. but its so old its obsolete and they don't make some of its parts. my dealer who services my equip sells them (muryama) . it was soooooo tempting.. the closest thing to muryama is definately shindaiwa. they are close but shinny's got the dealer network. both are incredible. use a sithl and then a shinny or mury and you'll ask yourself why stihl even exists..
__________________
Owner- Riverbend Landscape Service Cartersville,GA 2012 GMC Sierra 3500 dually Walker MT 26 EFI GHS Walker MBV Exmark Commercial 30 Exmark Commercial 21 AS Exmark Metro 26 Echo Stuff: PAS 280 w/shears,edger/trimmer/powerpruner/brush blade PE280 edger SRM-280T, SRM 230 HC 150 Shears CS370 chain saw Stihl MS290 Farm Boss Echo PB 770T blower Redmax EBZ8500 blower Shindaiwa M242 w/ pole shears and trimmer head Billy Goat F902S blower and KV600 VAC |
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|











Linear Mode
