Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 08-31-2009, 10:04 PM
jbturf jbturf is offline
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: groton, MA
Posts: 1,309
? for the briggs gurus

briggs vertical 6.5hp -- NLA no replacement
model 121687 type 0343

condsidering replacing with
model 121607 type 0562

are these motors close enough to be interchangable?
i plan on swapping the bottom sump w/pto from my old unit
onto the new

or if you have a more suitable model # that is available
thanks
Reply With Quote
  #2  
Old 08-31-2009, 10:51 PM
jbturf jbturf is offline
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: groton, MA
Posts: 1,309
so im guessing looking at a parts diagram, the pto runs off the cam shaft
am i best to order this piece as well?
part#694037 for ccw pto?
thanks
Reply With Quote
  #3  
Old 08-31-2009, 11:11 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,760
What failed on your engine ?

If the cam is still good just swap it to the new engine as well as the sump/pan, But order a new crank seal and sump/pan gasket.

One other thing, The crankshaft in these engines have different part numbers, I'm not sure I can look up the drawings on theses to see the difference so make sure the crank output shaft is the same size-length and end bolt size before you purchase.
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #4  
Old 09-01-2009, 08:15 AM
jbturf jbturf is offline
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: groton, MA
Posts: 1,309
since this motor is NLA,
i ve had them rebuilt 2x this year by a small engine mech,
never been right and at any rate
the governor does not work now and
it burns all of its oil daily

im worried the cam may be worn, it was not replace during rebuild and
has around 900 hours on it

thanks for the help
Reply With Quote
  #5  
Old 09-02-2009, 06:22 PM
jbturf jbturf is offline
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: groton, MA
Posts: 1,309
well PG refused to sell me just the pulleys and gearbox pieces/bracket to
ultimately eliminate the need for a pto shaft coming out of my motor,(these are parts from thier Ultra x upgrade kit)

so i ordered this motor and parts and im gonna try assembling and try it out
briggs 121607-0562
cam 694037
gasket 692232
crank seal 399781
pto seal 691952

ill take a couple pics and post my results
wish me luck

Last edited by jbturf; 09-02-2009 at 06:23 PM. Reason: more info
Reply With Quote
  #6  
Old 09-03-2009, 12:54 AM
pugs pugs is offline
LawnSite Silver Member
 
Join Date: Jun 2006
Location: Southwest of Chicago
Posts: 2,768
Quote:
Originally Posted by jbturf View Post
well PG refused to sell me just the pulleys and gearbox pieces/bracket to
ultimately eliminate the need for a pto shaft coming out of my motor,(these are parts from thier Ultra x upgrade kit)
So what happens if any of those parts fail? You need to buy another upgrade kit?

I just saw they have that on their website now...along with the price. 1500+ and you get a 200 dollar junk honda engine? LOL. At least put a GX series in the kit....
Reply With Quote
  #7  
Old 09-03-2009, 08:13 AM
jbturf jbturf is offline
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: groton, MA
Posts: 1,309
yah silly, but im sure it all revolves around the almighty dollar-
and their need for more of them
Reply With Quote
  #8  
Old 09-05-2009, 10:10 AM
jbturf jbturf is offline
LawnSite Bronze Member
 
Join Date: Sep 2007
Location: groton, MA
Posts: 1,309
can anyone find me this cam shaft #694037 ?
relatively quickly?

tew now says 1-2 months to get this

thanks
Josh
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:38 AM.

Page generated in 0.08564 seconds with 9 queries