What would you reccomend for us???

[PLS-Tx]

We have two 60" ztr's, we put about 300-400hrs on each of them per year.

We have been using a angle grinder for years, but I have been thinking about getting one of your blade sharpeners.

Thanks, Pat

[Magna-Matic]

Hello TAC,

Most likely your blades are conventional straight flat blades (excluding the lift) I would recommend the LOT #1 combo with the MAG-1000 balancer and MAG-9000 sharpener. That is really the MINIMUM package to get started properly servicing your own blades.

Check out the group buy, the best value is the LOT #1 option B

http://www.lawnsite.com/showthread.php?t=285360&page=1

Let me know if you have more detailed questions.

[PLS-Tx]

LOT 1 OPTION A (MAG-1000 & MAG-9000)
10% off = $79.90
Your Cost $719.10 Plus Shipping

Is This what you are recommending for us? How would I find out what shipping would cost? Btw, we do use high lift blades.

Thanks

[Magna-Matic]

Hello TAC,

I suggested OPTION B as listed in my original post - you copy and pasted OPTION A, but either one you like.

Shipping in most the lower 48 is about $25-30 for a LOT 1

Using high-lift blades i would most certianly go with OPTION B for the extended table.

Thank you,

[Green Pastures]

I highly recommend the extended table.