FasTrack SuperDuty Lift Points

[cemler]

Where is the best place to lift the SuperDuty series using a standard floor jack and stands?

Do you put a board between the deck and frame and lift the front of the deck?

Can the rear of the tractor be lifed at the bumper? I assume no because it is not part of the frame.

Also, anybody take the rear wheels off to service the hydros?

[mowerconsultant]

I have always jacked it up from the deck without putting a board between it and the frame.
As far as jacking it from the rear bumper, you will be ok there also, it is securely fastened to the frame.

Pj

[cemler]

Thank you for your reply.

Is it a good idea to remove the rear wheels to change filters and to drain the hydros? Or is this not necessary as their would be plenty of room once the filter guards are off?

[mowerconsultant]

Originally Posted by cemler

Thank you for your reply.

Is it a good idea to remove the rear wheels to change filters and to drain the hydros? Or is this not necessary as their would be plenty of room once the filter guards are off?

Removing the rear wheels makes it so much easier, the filter is right there behind them.
There is room to remove the filter after the guard off, but it is tight.

Pj