Register free!

The Green Industry's Resource Center




 
 
Thread Tools   Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-11-2010, 10:43 PM
Ohiojohn Ohiojohn is offline
LawnSite Member
 
Join Date: Feb 2010
Location: Grafton, OH
Posts: 10
Need help with 455-D stalling out

I have a 2000 455-D that will start and run OK, will idle at low or high throttle for as long as I want, but as soon as I press the forward drive pedal, it stalls out. This is a dead shut off where the glow plug light comes back on and the engine will recover if I pull my foot off fast enough. My local TORO shop mechanic thought it might be safety switch related and suggested that route. I located the seat switch and it appears to be OK. I unplugged it and jumpered out the connector and there was no difference, it still stalled. Any advice? As a side note; I have owned this unit for 5 years and use it to cut my 11 acre estate and have had no problems until now. I bought a 72" snow blower along with the 455D and this is the first time I have used it. I did my driveway twice and on the second time is when the unit started stalling.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:31 PM.

Page generated in 0.11340 seconds with 8 queries