Wanted to Buy:6x10 utility trailer

[AkRowdyA78]

Looking for a 6x10 utility landscape trailer. No homemades, doesnt have to be in the best condition. Will be using it to haul mowers, brush, and mulch. Will consider 5x10's but really nothing bigger than 6x10. Show me what you got and a asking price. Thanks Andy

[Nolimit124]

I know you said nothing larger but 5x12 isn't too much bigger let me know if you are interested I could get you pictures.

Thanks

[AkRowdyA78]

Originally Posted by Nolimit124

I know you said nothing larger but 5x12 isn't too much bigger let me know if you are interested I could get you pictures.

Thanks

Your too far away just to drive for a trailer.Lol

[Greyst1]

will a 6x12 work for you?

[AkRowdyA78]

Originally Posted by Greyst1

will a 6x12 work for you?

Nah 5x10 or 6x10 is what I want to get

[buckhigh]

I have a brand new 6x10 Carry-On with brakes I might consider selling. Was purchased at JTI in Northfield. Its only been used 1 season and is in immaculate shape. I thought about upgrading to a 16' and thats the only reason as to why I would sell it. It is single axle w/brakes, upgraded aluminum rims (to match the Chevy), all bolts replaced with stainless, all boards weather treated from Carry-On and Thompson Weather Seal by me, and every board has stainless nuts/bolts every 2' into the trailer frame. Always stored inside in my shop in Lakewood. Let me know if you're interested...

[AkRowdyA78]

Originally Posted by neols

I have a brand new 6x10 Carry-On with brakes I might consider selling. Was purchased at JTI in Northfield. Its only been used 1 season and is in immaculate shape. I thought about upgrading to a 16' and thats the only reason as to why I would sell it. It is single axle w/brakes, upgraded aluminum rims (to match the Chevy), all bolts replaced with stainless, all boards weather treated from Carry-On and Thompson Weather Seal by me, and every board has stainless nuts/bolts every 2' into the trailer frame. Always stored inside in my shop in Lakewood. Let me know if you're interested...

Sounds good and all but it is probably out of my budget. My plan is to get one thats a few years old and take the old sides off and put 2 and a half foot mesh sides on. Thanks Though

[AkRowdyA78]

Still looking bump...

[AkRowdyA78]

Bumpo again...

[AkRowdyA78]

bumpp......