Register free!

The Green Industry's Resource Center


Reply
 
Thread Tools   Display Modes
  #1  
Old 05-20-2010, 09:57 PM
swanny swanny is online now
LawnSite Senior Member
 
Join Date: Jan 2009
Location: mt. airy maryland
Posts: 563
How long to run auxilary hydro's w/o damage?

My owner's manual for the Takkie TL 120 says something about not running the aux. hydro's too long to prevent pump failure. I cut about an acre of 3' grass using the bushog w/ machine in two speed...running along at a good clip...takes me about twenty minutes or so. Temps in the 70's.

Think I can run longer without a break? The manual got me paranoid.
Reply With Quote
  #2  
Old 05-20-2010, 10:05 PM
Junior M's Avatar
Junior M Junior M is offline
LawnSite Fanatic
 
Join Date: Jun 2008
Location: South Carolina
Posts: 13,151
I've never heard of such a thing. I wouldnt run it full bore bogging the bush hog down, constantly though. That could possibly hurt something.

oh yeah, watch your temperatures and keep the engine bay clean from debris while doing this. The heat could catch the debris on fire if theres alot, depending on what your cutting.
__________________
Southeastern Services


Quote:
Originally Posted by bobcat_ron View Post

Just run the god damn sh*t out of the machine and the hell with all the other crap, make money instead of worrying about crap that only accountants think about!
Reply With Quote
  #3  
Old 05-20-2010, 10:56 PM
bobcat_ron's Avatar
bobcat_ron bobcat_ron is online now
LawnSite Fanatic
 
Join Date: Nov 2007
Location: Abbotsford, British Columbia
Posts: 9,947
Make sure the 1 way and 2 way hydraulics are activated with the detent, the 1 way allows the back pressure to drain out, while the 2 way holds the pressure because the attachment has to run in the opposite direction, it does make a difference, I ran a rock rake all day on Monday and it made the engine run cooler, but I had to switch it off to raise the rake head to dump.
__________________
The amount of energy necessary to refute bullsh*t is an order of magnitude bigger than to produce it


http://www.youtube.com/user/69rd96
Reply With Quote
  #4  
Old 05-21-2010, 04:56 PM
swanny swanny is online now
LawnSite Senior Member
 
Join Date: Jan 2009
Location: mt. airy maryland
Posts: 563
Quote:
Originally Posted by bobcat_ron View Post
Make sure the 1 way and 2 way hydraulics are activated with the detent, the 1 way allows the back pressure to drain out, while the 2 way holds the pressure because the attachment has to run in the opposite direction, it does make a difference, I ran a rock rake all day on Monday and it made the engine run cooler, but I had to switch it off to raise the rake head to dump.
I use it in single flow mode...if the hog is bogging down I get the same result with the boom/tilt action not responding too well.

Just wish the manual had some more specifics. Guess I could get a temp guage for the hydro's...that would be informative.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:03 AM.

Page generated in 0.07031 seconds with 9 queries