Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 05-25-2010, 07:32 PM
SterlingArcher SterlingArcher is offline
LawnSite Member
 
Join Date: Apr 2010
Posts: 37
Finally getting things smoothed out

This is my first year solo. Well, almost solo. I'm essentially renting all of my equipment from the guy that I worked for last year as he doesn't want to cut grass anymore, but feels like he should be making a few bucks off of his equipment. Can't say I blame him. He's worked hard and now he's ready to relax and enjoy the fruits of his labor.

When the season started out, I was using the Dixie ZTR as there was a problem with the Toro walk-behind. Something to do with the transmission. I tried replacing a coupler, only to find out that the real problem was the transmission shaft. The splines were all stripped down. It was almost imperceptible to the eye. When I put the new coupler on, the shaft actually engaged at first, but soon after it started doing what it had been doing the first time I cranked it up this year.

I ordered a new shaft. The wrong shaft came in. I re-ordered the right one, only when it came in, it had COARSE splines instead of fine ones like I needed. Just today, the right part FINALLY came in. I've probably lost 3 weeks worth of work over this. I haven't been able to advertise because what am I going to tell people? "I'm not sure when I'll be able to come cut your grass, but I'll give you an estimate! Then we can both sit around and estimate when I'll actually get my mower working and be able to do what you need me to! Life's like a box of chocolates!"

Needless to say, I've had more than a few rather unhappy clients call me and ask me when I'm going to return. It's been horribly embarrassing. I've been feeling not just like an amateur, but just kind of ghetto all around. The boss doesn't want me using the ZTR, which is understandable. If something breaks on it or if it dies in the middle of a job and I can't get it to start up, how am I even going to get it back on the trailer? I'm just one guy and those things are heavy as hell. Not to mention that repairs on those things can be complex and rather expensive.

ANYWAY...I got that transmission spindle in today. The right part, with the right splines and all. Hallelujia! I've never taken apart a transmission before, but I'll be damned if I'm not about to figure out what I need to do to make it work. Well that's what I did. Took me a good six hours and a little help from the boss, but I got that old walk-behind running just as clean and smooth as it did back in 96'. Yes, I am feeling smugly accomplished

Point is, anyone that's thinking about starting up a lawn care business: plan for every contingency. Hope for the best, but plan for the worst. Assume that everything that can go wrong will indeed go wrong. I had to learn that the hard way, but I think I'm finally going to be alright. I got a part time job at a restaurant to work nights just long enough to help the ends meet until my business really takes off.

You know what's funny though? And I must be a glutton for punishment, but even with all of the trials and tribulations over the past few weeks when failure seemed absolutely imminent...I'm still just as fired up, excited and optimistic about doing this business as I was 5 weeks ago when everything looked like it was going to be a piece of cake. I will make it happen.

Sorry about the rant, but sometimes you just gotta pump yourself up a little. Thanks to all of you guys that have given me good advice and pointers. This is a great site.
Reply With Quote
  #2  
Old 05-26-2010, 04:08 AM
bohiaa's Avatar
bohiaa bohiaa is offline
LawnSite Fanatic
 
Join Date: Jun 2005
Location: Bellville Texas, near Houston
Posts: 5,020
you havent seen nothing yet
Reply With Quote
  #3  
Old 05-27-2010, 02:30 AM
GrassIsGreenerLawnCare's Avatar
GrassIsGreenerLawnCare GrassIsGreenerLawnCare is offline
LawnSite Senior Member
 
Join Date: Mar 2010
Location: VA
Posts: 634
Quote:
Originally Posted by bohiaa View Post
you havent seen nothing yet
try having 2 mowers go down at the same time. i bought 2 mowers. one to use if the other one was down. i had sum dumbass biatch hit my trailer at a stoplight. bam there goes my mowing. luckily i learnd how to work on my equipment and had em up in runnn in no time(parts ordered too)....but i ended up usin a 21" push mower because i refuse to have my customers hate me. the way i look at it is we are responsible to have there lawns taken care of no matter what breaks down. point: u shoulda been out there pushin em man. and yes, i have full acre accounts that i pushed, so it is possible to keep ur customers happy and save urself the embarrassment. luckily i only had to do it for 3 days
Reply With Quote
  #4  
Old 05-27-2010, 09:32 AM
bohiaa's Avatar
bohiaa bohiaa is offline
LawnSite Fanatic
 
Join Date: Jun 2005
Location: Bellville Texas, near Houston
Posts: 5,020
I hear ya, you wouldn't belive some of the issues I have seen, mainly from dumb mistakes.

I try to always have back ups, just incase.

had a guy stick a ztr in the mud, so he gets his coworker to get the other z and pull him out, well Guess what, he stuck this one too, so I had 2 z's stuck badly, it took me around 2 hrs to get em out, of corse 2 hrs for me and them that = 6 man hrs. there goes a day...

Best of luck
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:23 AM.

Page generated in 0.08286 seconds with 9 queries