Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 08-18-2010, 11:01 AM
KingOfCupCar20 KingOfCupCar20 is offline
LawnSite Member
 
Join Date: Aug 2007
Posts: 60
Wright Stander Kill Switch

Does anyone know how disable the kill switch for a 52 wright stander? For the past couple weeks it has been really sensitive and if i shift my weight even a little the blades start to disengage. how do i disable the kill switch? I was working yesterday and the blades wont engage at all anymore without the mower wanting to die.

I know how to adjust the lever that pushes down but that hasnt worked, i would like to know how to disable it all together. Thanks!

D
Reply With Quote
  #2  
Old 08-18-2010, 11:53 AM
KingOfCupCar20 KingOfCupCar20 is offline
LawnSite Member
 
Join Date: Aug 2007
Posts: 60
also the blades start to go but then it cuts out before continuing to run
Reply With Quote
  #3  
Old 08-18-2010, 01:52 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,657
For test purposes only, you can just bypass the switch by jumping the wires.I think the OPC circuit has a time delay built in which explains the blades acting up. I'm not familiar with the Wrights but it should work something like that.
You should NOT operate the unit with the OPC disabled. ( my lawyer made me add that LOL )
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!

Last edited by BigFish; 08-18-2010 at 02:01 PM.
Reply With Quote
  #4  
Old 08-19-2010, 10:06 PM
olde_blue olde_blue is offline
LawnSite Senior Member
 
Join Date: Jan 2008
Location: St. Louis, MO
Posts: 343
Wright Standers don't have a time delay circuit. Check and see if mud, sticks, or leaves aren't stuck under the front of the platform not allowing it to travel all the way down--I've had this problem before.

Jumpering the plug will bypass the switch; if this fixes the problem, you probably ought to replace the switch. They aren't very expensive.
Reply With Quote
  #5  
Old 08-20-2010, 01:42 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,657
Quote:
Originally Posted by olde_blue View Post
Wright Standers don't have a time delay circuit. Check and see if mud, sticks, or leaves aren't stuck under the front of the platform not allowing it to travel all the way down--I've had this problem before.

Jumpering the plug will bypass the switch; if this fixes the problem, you probably ought to replace the switch. They aren't very expensive.
Yeah they do! At least according to the '09 Op. Manual on the Wright website.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:41 AM.

Page generated in 0.07087 seconds with 9 queries