source for high flow PRV

[greenmonster304]

I need a prv that flows 300 plus gpm. any ideas?

[Sprinkus]

Bermad is usually what we use for applications like that.

[Wet_Boots]

What's the size of the pipe, and what are the inlet and outlet pressures? Consider a ladder arrangement, if this is a whole-building PRV.

[greenmonster304]

it is for the polo club sand track from the other thread. It could be a 4". The pressure could be as high as 125lbs coming in and I think 70lbs going out would work.

[hoskm01]

Originally Posted by greenmonster304

it is for the polo club sand track from the other thread. It could be a 4". The pressure could be as high as 125lbs coming in and I think 70lbs going out would work.

http://www.bermad.com/product/produc...0-ir/cat=50565 ???????

[Sprinkus]

Couple of helpful links:

http://www.mehandeseng.com/aboutus_news_200408a.asp

http://www.watts.com/pages/learnAbou...atId=64#sizing