Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 02-19-2003, 04:44 PM
Mykster's Avatar
Mykster Mykster is offline
LawnSite Senior Member
 
Join Date: Jan 2002
Location: Arlington, WA
Posts: 668
Deisel swap will run an arm and a leg. Dual exhaust or K&N filter won't give you the noticable power your looking for while towing, didn't for me. Check if they have a computer upgrade or a aftermarket chip for that year of truck.
__________________
Mike
Sawyer Lawn & Landscape
Western, Wa.
<br>
<img src="http://www.kristofferson.com/sawyerlogo_transp.gif" border="0">
Reply With Quote
  #12  
Old 02-19-2003, 11:44 PM
A1 Grass's Avatar
A1 Grass A1 Grass is offline
LawnSite Senior Member
 
Join Date: Sep 2002
Location: San Antonio, Texas
Posts: 330
As I mentioned, my trailer is only a 6x8 enclosed (one scag 32wb, and a couple hundred pounds of the rest of the normal stuff. I'm just a 1-2 man crew NOT looking to expand). I'm won't be pulling anything larger for now. It's not that heavy of a load... it just tends to bog on long steep grades.

Plus.... I really am on a budget for this, so most likely suggestions like "buy a different truck" or even extensive mods are probably not going to happen real soon. I am thinking more along the lines of the K&N and muffler, and maybe a 4bbl and manifold from the junk yard!

Don't get me wrong - I do appreciate the help. LOTS of great suggestions.

Thanks
__________________
A1-Grass - High Quality Lawn Service

There is unrest in the Forest, there is trouble with the Trees
for the Maples want more sunlight and the Oaks ignore their pleas..
Reply With Quote
  #13  
Old 02-20-2003, 04:37 PM
Barkleymut Barkleymut is offline
LawnSite Bronze Member
 
Join Date: Jan 2000
Location: Richmond, Virginia
Posts: 1,117
I had a 98 Ram with the 318. First off are you towing with the O/D off? I dunno if your year even had O/D but mine had no torque while in O/D. I put a K&N in and could notice a very slight difference. I pulled a 16ft open which totally loaded sometimes exceeded 5,000 lbs. It struggled but I was always able to eventually get up to speed without much of a problem.

I think the best thing about the K&N is that if you keep the truck for 150,000 miles you will save money as opposed to buying paper filters. Plus I think it does a better job of cleaning the air.
__________________
Lots of equipment and experience.
Reply With Quote
  #14  
Old 02-20-2003, 06:51 PM
Randy J Randy J is offline
LawnSite Bronze Member
 
Join Date: Aug 2001
Location: Richmond, KY
Posts: 1,126
One thing no one has mentioned, that I'd certainly check into is a Jacobs Electronic Ignition set up. Cost is around $500 - $600, not cheap, but cheaper than getting another truck. And I've heard it makes a big difference in horsepower, and in mileage. If you're around a radio on Saturday or Sunday afternoons, tune it to AM 550, and listen to the car talk show (I'm drawing a blank on his name right now). He's pretty high on these kits. Otherwise, I vote for trading for a Cummins.

Randy
Reply With Quote
  #15  
Old 02-21-2003, 02:36 PM
mag360's Avatar
mag360 mag360 is online now
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,365
A1, no muffler=pretty loud, not exactly legal, will pass emissions but not the visual inspection of the exhaust. My solution-do emissions seperately (they won't put the truck in the air) And have a regular mechanic (good friend preferably) do the safety inspection.

-Horsejockey---5 hp on top of a stock 145 or so is not bad for $10 or less and an hour of your time plus reduced air restrictions lets the increased airflow through easily from a K&N filter making the filter produce more power. Add to that a 4barrel carb and torquer intake manifold (do you notice the air flow theme) and the two inexpensive mods make the real mods-carb and manifold more productive. If you have some good advice to give please share it. It is possible that you know alot more on this subject than the rest of us but you have yet to prove it. Please give good advice or none and I will try to do the same.

-jsr2741 makes a good point-you can get underdrive pulleys for around $80 that are good for a couple horses. As far as ditching the cat, I agree it will help on power but my '87 failed emissions miserably when I tested with no cat. Pa emissions are pretty strict though-maybe you can get by with it in Texas.

-good luck man and do what you can on a limited budget-I've been there-wait....I'm still there.
__________________
Our trucks, mowers, leaves, plows sale thread
http://www.lawnsite.com/showthread.php?t=416316

Last edited by mag360; 02-21-2003 at 03:13 PM.
Reply With Quote
  #16  
Old 02-22-2003, 10:16 AM
imalandscper imalandscper is offline
LawnSite Member
 
Join Date: Dec 2002
Location: Fond du Lac, wi
Posts: 185
What?

Who in the heck would take a chance of putting a cummins in a 1/2 ton? You know how much torgue there is on the frame of a dodge 3/4 or 1 ton with a cummins in it? it would twist that frame in the 1/2 ton quickly. Not to mention you would need a whole new drivetrain and fuel system along with all the firewall and dash accessories. No way. dump it and buy somehting 3/4 or higher no less.
Reply With Quote
  #17  
Old 02-22-2003, 01:44 PM
IRISH IRISH is offline
LawnSite Member
 
Join Date: Jan 2000
Location: greenville mi.
Posts: 46
get an older 318 76 or 77 (more horsepower cheap) with under a 100,00 mi. put a fresh carb on it new timing chain and gear drop it in get rid of any cat. converter **** run dual pipes all the way out the back
if you decide the 360 route make sure to change torq converters

my thoughts


my mopars all 4x4 all plowin snow
94 2500 hd
93 150
89 150
85 350 hd
85 ram charger
85 ram charger
77 350 super hd
several out back for parts and pieces
Reply With Quote
  #18  
Old 03-10-2003, 02:01 PM
IBGreen's Avatar
IBGreen IBGreen is offline
LawnSite Senior Member
 
Join Date: Sep 2002
Location: Little Rock, Arkansas
Posts: 727
HEMI
__________________
Evergreen Lawn & Landscape
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:41 PM.

Page generated in 0.10236 seconds with 9 queries