Fluid Film banner

[DLAWNS]

Originally Posted by Lefet

Gotta love that FF. Just finished the blower mower for the ZTR and did the front lawn.
Thanks Bill, worked like a charm!!

No problem man...glad to hear it worked for ya! Something else I learned is that if you apply it like a day or so before you use it, it works even better. And than reapply as needed and you will be golden.

[Lefet]

Yeah, I kinda learned that one by accident. Took the blower motor apart a while ago. Filmed it up, the just didn't have the drive to put it back together. So to justify me NOT doing it, I'd spray it again in a couple of days. I probably put enough on there for a couple of years.

[JoyofFluidFilm]

Originally Posted by DLAWNS

The Fluid Film stickers come from Dano and Joy at Fluid Film, the keychains come from Kellsport when you make an order. The banner also came from Kellsport as a special promo or something.

all we need is a picture of you with the fluid film shirt and hat posing with the banner

[DLAWNS]

Originally Posted by Lefet

Yeah, I kinda learned that one by accident. Took the blower motor apart a while ago. Filmed it up, the just didn't have the drive to put it back together. So to justify me NOT doing it, I'd spray it again in a couple of days. I probably put enough on there for a couple of years.

Haha nice!

Originally Posted by JoyofFluidFilm

all we need is a picture of you with the fluid film shirt and hat posing with the banner

haha...maybe one day...lol

[JoyofFluidFilm]

Originally Posted by DLAWNS

Haha nice!



haha...maybe one day...lol

ok..that one day is today

[mowerdude777]

Very nice, I gotta get one of those soon

[User Name Taken]

Originally Posted by DLAWNS

The Fluid Film stickers come from Dano and Joy at Fluid Film, the keychains come from Kellsport when you make an order. The banner also came from Kellsport as a special promo or something.

So jealous

[grassman177]

we ordered a case of the 11.75oz cans the other day.

looking forward to it. worked great on corosion, but did find out something bad about it and that is it freezes apparently. i used it on all choke and throttle cables and every one them worked fine tonight when starting up the machines we just sold(standers). they were parked outside in about 20degrees for maybe 30min and the cables were completely frozen and could not be moved!!

that was a bit disconcerning, but is rare it matters anyhow as we are not using these machines in that cold

[a plus bob]

Originally Posted by grassman177

we ordered a case of the 11.75oz cans the other day.

looking forward to it. worked great on corosion, but did find out something bad about it and that is it freezes apparently. i used it on all choke and throttle cables and every one them worked fine tonight when starting up the machines we just sold(standers). they were parked outside in about 20degrees for maybe 30min and the cables were completely frozen and could not be moved!!

that was a bit disconcerning, but is rare it matters anyhow as we are not using these machines in that cold

Must be from where you washed them or some thing.I use it on my snow blowers and never have a problem.

[Dano50]

We've tested Fluid Film to -30F and it didn't freeze. There must have been something else going on there.