Today in east TN there was 3 inches of snow on the ground. Down here that is a blizzard for most people. so with a worthless day I decided to build a mount for my little wonder to fit my zero turn.
Started off by picking up some square u bolts and a 6" receiver tube from a local trailer supply store.
After a little cutting and welding, I came up with this...
Im almost finished with it, I just need to pick up a small chain that will adjust the angle of the nose of the blower. You can't tell in the picture but the brackets that hold the axle of the blower have nuts welded in them so I can spin a bolt in to lock the axle in.