Originally Posted by greyim
2.5 hrs wish you were my mechanic... took me about 7 hrs each way. but that includes trips to the shop for thisnthat and sanity breaks!
But how do you get motor out without removing wheels???!!
I put the machine on my lift so I can stand up and work...saves a lot of time.
Undue two 19mm bolts on pivot points, slide rail out 4", undue slack adjuster..stand it straight up, remove bearing plate and each roller/bolt, pull off drive cage face, undue hoses, pull motor bolts and remove motor (rear drive cage retainer is left to hold up track).