Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-05-2011, 12:06 AM
whiffyspark whiffyspark is online now
LawnSite Platinum Member
 
Join Date: Jul 2011
Location: Chesapeake beach
Posts: 4,717
JD 4400 Yanmar Won't run

My JD 4400 Isn't getting fuel past the injection pump. The tractor had been sitting for a couple years, I drained the fuel changed filters, lines, etc. and now it won't start. If I give it a wiff of wd40 it'll run, but i'm not getting any fuel out of the injector lines. I've tried bleeding them with the plunger to no avail. The soleniod has a loud click and i'm getting over 12 volts at it with the key on so I don't think it is the solenoid or thermistor. I'm getting fuel to the pump.

If i crack open either line on the pump fuel comes out, but it won't come out of the injector line no matter what i do.

Any Ideas?

Thanks, Mike
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:29 AM.

Page generated in 0.08872 seconds with 8 queries