PG Magnum hour meter flashes 'Lube'
Had my PG Mag hour meter flashing the RPM's intermittently with the readout 'Lube'. I would assume that this means that I need to check the engine oil level, correct (I do not have the full manual for the machine unfortunately).
Weird thing is, I checked the oil before I started my day and the level was adequate. Is this readout perhaps a reminder to change the oil in the machine?
I do need to do that, BUT the oil level is NOT low.
I am not understanding this, pls help if you can.
7x14 Stealth SE Enclosed with 48" side ramp
2013 Gravely Pro Turn 260 with Kohler 26.5 EFI
08 Toro Z400 48" deck, 21HP Kaw with EZ Vac twin bag
09 Exmark Turf Tracer HP 36"
21" Toro SR4 Super Recycler
Stihl KM90 Kombi w/ straight shaft trimmer & tiller heads
2 Husqvarna 125B Blowers
Turfco XT5 Aerator
Turfco LS-22 Overseeder
EcoLawn 200 Applicator
I can do all things through Him who gives me strength.