Pulser wiring question

[greenmonster304]

I opened up my pulser became thought the battery was bad and I found a black wire that was broken off from some where. It is not evident where it came from so I was hoping one of you guys who has one could open it up and tell me what terminal it goes to. It's the only black wire in there. Thanks a bunch.
Posted via Mobile Device

[Buck_wheat]

Any particular brand & model #?

[greenmonster304]

Progressive 2003
Posted via Mobile Device

[Buck_wheat]

I've never had an opprtunity to open one up. I believe Progressive was taken over by Tempo here's a link: http://www.tempo-textron.com/

Maybe you can get tech support, or someone else will chime in.

[1idejim]

Originally Posted by greenmonster304

I opened up my pulser became thought the battery was bad and I found a black wire that was broken off from some where. It is not evident where it came from so I was hoping one of you guys who has one could open it up and tell me what terminal it goes to. It's the only black wire in there. Thanks a bunch.
Posted via Mobile Device

post a pic, they aren't that complex

[greenmonster304]

I have since called tempo. They told me where it went.
Posted via Mobile Device

[Sprinkus]

Goes to "blk -" on circuit board.
OK, I just made that up.

[Buck_wheat]

Originally Posted by Sprinkus

Goes to "blk -" on circuit board.
OK, I just made that up.

could go to blue or red also

[1idejim]

Originally Posted by greenmonster304

I have since called tempo. They told me where it went.
Posted via Mobile Device

soooooo what'd they say?

[greenmonster304]

It came off a terminal on the charging port. It was confusing because it was soldered to a post that had a brown wire. There were also two unused posts so I wasn't sure where it went. I still have to get a new battery. I went to radio shack to get some soldering supplies and to see if they had a battery but they don't carry that one. I guess I will have to order one.
Posted via Mobile Device