Kohler Command Pro 18hp Leaving Me Stumped
I've got a command pro 18hp on a scag walk behind that's been working well for a few years, a while back it started to run rich, and then not at all, due to the plug being fowled so quickly. After cleaning the plug the mower runs alright for a few minutes until the plug gets fowled again and it begins to misfire and eventually quit running, here's what I've tried to fix it....
Checked airflow to carb
Replaced fuel filter
Switched spark plugs
Re-gapped spark plug (.020 in.)
Cleaned carb. MANY times
Installed a carb. kit that included a few gaskets, fuel inlet seat, and fuel inlet needle
Adjusted carb. (even at the leanest setting it still runs very rich)
Checked that the carb. float does float and isn't broken
It's been sitting in the garage for about 1/2 a year now, I just can't figure out what's wrong with it, do I need a whole new carb ($130-150ish)?
The carbon on the plug seems to be a dry powdery carbon, not oily.
The exhaust also seems strange, it has a chemical smell/fume to it, that seems to burn your nose, maybe the engine's always ran like that though.
Anybody got any ideas on what the issue could be or how to fix it?
If then God so clothe the grass, wich is today in the field, and tomorrow is cast into the oven; how much more [will he clothe] you, O ye of little faith? (Luke 12:28)
For if we live, we live to the Lord, and if we die, we die to the Lord. So then, whether we live or whether we die, we are the Lord's. (Romans 14:8)
|carbon fouled , kohler , misfires , runs rough|