Click for Weather
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
09-07-2011, 06:59 PM
|
||||
|
||||
|
mounting leaf loader to fisher plow frame
i have a 2500HD with fisher push plates...is there anyone with a fisher that mounts a leaf loader to the front of their truck? if so would you be able to explain to me how and maybe share some pictures? i have access to a welder if it is needed to make the loader able to mount to the front of the truck...thanks
__________________
2005 Chevrolet 2500HD LS 4x4 6.0L 8' Fisher MM Snowplow 6.5' x 14' Big Tex Open Trailer 61'' Scag V-Ride 29 HP Kawi 48" Exmark Lazer Z HP 48'' Bobcat Ransome Mower 21'' Husqvarna Mower Stihl FS55R Weedwacker Stihl FS100RX Weedwacker Stihl BR600 Backpack Blower Stihl MS180C Chainsaw Giant Vac Walk Behind Blower Kawasaki KHT600S Hedge Trimmer Giant Vac 16HP Leaf Loader 
|
|
#2
09-07-2011, 09:23 PM
|
|||
|
|||
|
I would like to know as well. I have a 2000 F550 with fisher push plates and am trying to figure out how to mount the leaf loader on the front of the truck.
__________________
Trucks: 2009 Ford F350 2000 F550 7.3L 1999 F350 7.3L Equipment: 8X16 enclosed trailer 2004 48" Scag walk behind 2009 48" RP Wright Stander 2009 21" commerical toro Stihl BR600 (2) Stihl FS 100rx trimmer Stihl Kombi unit and all attachments Little Wonder 9hp 20hp tow behind Lesco leaf loader rakes/shovels/buckets/good workers
|
|
#3
09-08-2011, 06:08 AM
|
||||
|
||||
|
last year i put a hitch on the front of the truck but then i had to take it off when i got the push plates installed so im not sure what im gonna do this year
__________________
2005 Chevrolet 2500HD LS 4x4 6.0L 8' Fisher MM Snowplow 6.5' x 14' Big Tex Open Trailer 61'' Scag V-Ride 29 HP Kawi 48" Exmark Lazer Z HP 48'' Bobcat Ransome Mower 21'' Husqvarna Mower Stihl FS55R Weedwacker Stihl FS100RX Weedwacker Stihl BR600 Backpack Blower Stihl MS180C Chainsaw Giant Vac Walk Behind Blower Kawasaki KHT600S Hedge Trimmer Giant Vac 16HP Leaf Loader
|
|
#4
09-11-2011, 08:54 PM
|
||||
|
||||
|
well if you have the leaf loader mounted on a platform that is all set to go into a 2" reciever, then you need to find an fisher plow and cut the pieces off that go into the push plates and put a heavy bar across the front with a 2" reciever on it so you can mount your leaf loader, or just mount the fisher plow arms or whatever you wanna call them to you leaf loader. mounting the plates to the bottom of the platform the leaf loader is on would probably be best.
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
