Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 09-21-2011, 12:45 AM
mow king mow king is online now
LawnSite Senior Member
 
Join Date: Mar 2005
Location: Cleveland/Columbus, Ohio
Posts: 561
Trailer Bearing issue

I have a 2007 Big Tex 10k gvw skidsteer trailer from about 120 miles away. It was a Case 95XT with solid tires so it obviously put the trailer overweight.

The trailer pulled fine and the front axle seems fine but when I arrived back home the rear wheels were covered in grease that leaked out of the hub/bearing.

What's going on here? Should I just re-grease them? Or do they need to be replaced?

Moving the 95XT was a one time thing or I'd upgrade to a heavier trailer.

Thanks.
__________________
Reply With Quote
  #2  
Old 09-21-2011, 12:54 AM
knox gsl's Avatar
knox gsl knox gsl is online now
LawnSite Gold Member
 
Join Date: Jun 2010
Location: knoxville, tn
Posts: 3,763
New bearings, seals and repack. The seals are most likely dried out and leaking. I'm guessing this was a long trip for you, between the extra weight and long miles the grease got hot enough to become liquid.
Posted via Mobile Device
Reply With Quote
  #3  
Old 09-21-2011, 01:21 AM
PlantscapeSolutions's Avatar
PlantscapeSolutions PlantscapeSolutions is offline
LawnSite Silver Member
 
Join Date: May 2008
Location: Buda,Texas
Posts: 2,655
I would check the brakes as well. If the brakes are worn or if the trailer only has brakes on one axle it will over load the brakes and cause them to over heat. I'm thinking you had to get the hubs pretty hot to make all the grease run out.
Reply With Quote
  #4  
Old 09-21-2011, 11:00 AM
TrailerProjects TrailerProjects is offline
Sponsor
 
Join Date: Sep 2011
Location: Sarasota, Florida
Posts: 3
Sounds like with the over weight, your bearings were heating up and turned the grease to a liquid, I would take them apart put new bearings/races/seals and repack them with a quality bearing grease. While they are apart I would check the brakes, and magnets, also check to see if they have grease fittings, check to make sure that the grease flows through the passasge way before assembly. I like Big Tex trailers, they are made tough! www.TrailerProjects.com sells the repair parts for your project.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:23 PM.

Page generated in 0.07007 seconds with 9 queries