Learning alot about propane conversions

[ed2hess]

Originally Posted by djagusch

The only thing Ed is missing is an exhaust analyzer to make sure it is running properly. Plug readings, and checking exhaust temps could also make sure it is running right. He got the carb from Kohler directly so it should be pretty close from the get go.

You got me curious.......since I didn't do any of the above except
rpm what do I need to do? The machine wouldn't start after a couple days so I opened the adjusting screw that has a lock nut about 1 and 1/2 turn. It now starts and runs fine at idle and under heavy load. There is an idle screw and a run screw that is caped so I didn't touch neither. Should I expect this propane to run hotter than gas?

This machine isn't being used much so ......I got time to take it back
in to the shop. And to Terry I understand. I need to get more information.