Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 12-08-2011, 09:56 PM
guy89 guy89 is offline
LawnSite Member
 
Join Date: Dec 2011
Posts: 2
Redmax Gear Repair

Need to replace the gears on a Redmax BCZ2401S, stuck on #6 after removing snap ring. How do I get the bearing out? Does it come out with the shaft?

Reply With Quote
  #2  
Old 12-08-2011, 10:29 PM
NEW CITY LAWN CARE LLC's Avatar
NEW CITY LAWN CARE LLC NEW CITY LAWN CARE LLC is offline
LawnSite Bronze Member
 
Join Date: Nov 2008
Location: Central Point, OR
Posts: 1,180
and you removed the set screws to remove the shaft/bearing?
Reply With Quote
  #3  
Old 12-08-2011, 10:41 PM
MowerMedic77's Avatar
MowerMedic77 MowerMedic77 is offline
LawnSite Bronze Member
 
Join Date: Jul 2005
Location: In the shop breaking stuff....
Posts: 1,164
Yes the bearing comes out with the shaft (9) you will also have to remove the screw (18) as part of your teardown. I have a special puller I use to tear gear heads down but you can basically do the same thing by screwing a nut onto the threads (9) and clamp that into a vice then using a hard plastic hammer tap the case back, forcing the shaft and bearing out from the case. Good luck hope it helps....
Posted via Mobile Device
Reply With Quote
  #4  
Old 12-08-2011, 11:18 PM
guy89 guy89 is offline
LawnSite Member
 
Join Date: Dec 2011
Posts: 2
All exterior screws removed and head removed from shaft. I tried the nut and hammer but doesn't seem to be budging. I'll get agear puller to see if that'll work.
Reply With Quote
  #5  
Old 12-08-2011, 11:29 PM
NEW CITY LAWN CARE LLC's Avatar
NEW CITY LAWN CARE LLC NEW CITY LAWN CARE LLC is offline
LawnSite Bronze Member
 
Join Date: Nov 2008
Location: Central Point, OR
Posts: 1,180
Or Grab a good Deep dish Socket just larger than the gear spline and hammer it off, being careful of course, and use a piece of wood on the other end to avoid chipping..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:58 AM.

Page generated in 0.08135 seconds with 9 queries