Register free!

The Green Industry's Resource Center



 
 
Thread Tools   Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-28-2011, 05:41 PM
kilabeez0 kilabeez0 is offline
LawnSite Member
 
Join Date: Dec 2011
Posts: 29
just acquired a redmax 8001 with blown piston, couple questions

Hello, noob here. Ive rebuilt a few motors in my day so I'm familiar with the process. My neighbor owns a landscaping company and I was helping him out doing fall cleanups when one blower wouldn't start after shutting it off. The next day we started it in the morning and just let it run for 6 or 7 straight hours because we needed to get through the day Anyway it finally stopped running and he offered it to me for cheap. We haven't figured a price but I might just work a few hours for him in exchange.

I pulled the top end off and saw the piston had melted an indent in the middle and had cracked along the dome. The cylinder seems ok but I need to get a look in better light. So far I have a list of of about $30 in parts and $10 shipping which consist of a piston, 2 rings, pin, and base gasket from redmaxpartsdirect.com

I was going to reuse the circlips on either end of the pin and hopefully the cylinder and be in this for cheap money. My question is would you recommend the wrist pin bearing and keepers or should they be ok? Any tips I'd appreciate. Like I said I've rebuilt motors but mostly 4 strokes and a couple snowmobiles. Thanks in advance
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:38 AM.

Page generated in 0.11736 seconds with 9 queries