Boom kit for Permagreen Mag.

[LawnGuy73]

I'm hoping to see Ross around town here soon, I will ask him if he has plans to start making them again.

[DA Quality Lawn & YS]

Originally Posted by superchad

If you cant get ahold of him try Kevin at Contree in Beaver Dam WI. He has been talking to one of our guys about adding one to one of our magnums.
1-800-433-3579 or 920-356-0121. Tell him Chad from Mapleleaf sent you.

I send a message to Contree through their website. I am interested in a boom kit for my Mag as long as the output is adequate to cover nicely. I SO miss the Centri for the dual nozzle output.

[chevyflan]

Originally Posted by DA Quality Lawn & YS

I send a message to Contree through their website. I am interested in a boom kit for my Mag as long as the output is adequate to cover nicely. I SO miss the Centri for the dual nozzle output.

I have a 2008 permagreen magnum called permagreen this week and ordered a conversion kit to spray a half gallon of water per thousand . It comes with new nozzles and they said 2 nozzles will spray at the same time.

[DA Quality Lawn & YS]

Originally Posted by chevyflan

I have a 2008 permagreen magnum called permagreen this week and ordered a conversion kit to spray a half gallon of water per thousand . It comes with new nozzles and they said 2 nozzles will spray at the same time.

Really, tell me more. It would have to be some sort of boom as two nozzles could not spray at the same time as set up on a factory Mag, they are far too close together. Thanks.

[DA Quality Lawn & YS]

Update, called Contree in WI about PG boom. Guy acted like he had never heard of a PG Magnum b/f and he is in the spray fab business. Said its hard to fab a boom if he doesn't have the machine on hand. That said, likely wont be calling him back.

Anyone have any specs on building your own boom?

[itturf]

does anyone know where to get a spray boom for PG magnum or let me know what parts i will need?

thank you
Scott

[DA Quality Lawn & YS]

yes, 2nd on a boom for a Mag OR a higher output dual nozzle setup that chevyflan talked about above.

[itturf]

i know i can fabricate the boom. just wanted to see if anyone can post a few close up pictures especially how the spray nozzels are mounted to the polly rod.
thank you,
scott