Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #21  
Old 02-24-2012, 12:59 PM
David Gretzmier David Gretzmier is online now
LawnSite Gold Member
 
Join Date: Mar 2001
Location: Fayetteville,AR
Posts: 3,654
to answer the other question above, how much your switching on/off affects voltage at other fixtures depends. I have seen nightscaping transformers drop a full volt or more by adding 100 watts to a 500 watt trans that was only running 250 "bulb watts" to start with. I would say you have little to worry about on a quality multi tap torroidial trans running less than 70% load. as you go from 70-90% load you start to see some noticable volt drop across all taps. not matter the load, if you are switching on 180 watts, you will see some drop across all taps. it is easy enought to test by switching the commons on and off while you have your circuit tester handy at the trans. The greater problem is volting all your lamps properly with the switch on and then having premature burnout if the switch is usually off.
__________________
freedom
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:23 AM.

Page generated in 0.05662 seconds with 9 queries