Click for Weather
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
03-05-2012, 01:57 PM
|
|||
|
|||
|
Anyone know what hoist system this is?
I'm thinking of purchasing this truck but the owner has no idea what brand roll off it is. Its on a 04 int 4300 so it seems to be a light duty system.I searched around and came up with nothing. It seems to have no sub frame and a scissor lift. Can anybody help me identify it, I'm wondering if it maybe homemade. Im going to try to upload pic again soon its not letting me at the moment.
Thanks 
|
|
#3
03-05-2012, 06:53 PM
|
||||
|
||||
|
it does look small for that truck
__________________
Kubota KX-161-3 Excavator Takeuchi TL120 CTL International 4400 Dump DT530 10 ft municipal plow 2 Toro Z-Master G3 29hp 60's Toro DFS Bagger Silverado 2500HD Hiniker 8.5 Poly V plow Monroe 8 ft Spreader Cam Superline 8 ton Tag Single axle landscape trlr Billy Goat Force blower 18 HP Vanguard Stihl Trimmers Stihl FS 550 Brush Cutter Stihl MS 441, 261, 192 saws JRCO Attachments
|
|
#4
03-05-2012, 10:43 PM
|
|||
|
|||
|
looks like a switch n go
http://www.switchngo.com/products.aspx
|
|
#5
03-06-2012, 10:38 AM
|
|||
|
|||
|
It is very close to the SNG system and infact the switch n go is what I have been looking to build a truck with. This system should take standard dumpster cans unlike the SNG system that has a one off rail system.* Im just worried that if I can't track down the manufaturer when it comes time to replace stuff it going to have to be custom fab work. Im also curious to see the dumping specs and to see what the manufacters thoughts are about putting 1200 gallons of water on the system.
|
|
#6
03-06-2012, 02:38 PM
|
||||
|
||||
|
Switch and goes are the only ones i've seen using a scissor lift instead of telescopic. Don't know if that helps any.
__________________
Life summed up by refrigerator magnets: HE WHO DIES WITH THE MOST TOYS WINS OLD RANCHERS NEVER DIE, THEY JUST QUIT HORSIN AROUND
|
|
#7
03-06-2012, 06:39 PM
|
||||
|
||||
|
I doubt that is a switch n go as they never had rails like that or the center roller which I think is due to patents. Also SNG only takes their bodies they can't pick tradtional dumpsters like it shows above. To me it looks like a home made lift that was made from parts they had around and robbed the rails from a junked or old roll off truck. The hoist look really far forward to the cab. I know mind sits just in front of the rear wheels. How smooth are all the welds that will tell you.
|
|
#8
03-06-2012, 07:01 PM
|
|||
|
|||
|
These are a couple of manufactures that i used to use and work on good luck on identifying the frame.DRAGON MFG,ESP, GALBRAITH,CLEMENTS
|
|
#9
03-06-2012, 08:15 PM
|
|||
|
|||
|
looks like a one-off job to me. The winch looks off the shelf, the cross members are not uniform, and its just too crusty for the year of the truck.
__________________
UVM SBA 2012
|
|
#10
04-05-2012, 11:00 PM
|
|||
|
|||
|
Nope not a Switch n Go...
But this is: http://www.youtube.com/watch?v=k65cCLquIrs It has worked well for our needs.
__________________
TTolla Const. Svcs. Unl. Kubota KX121-3 E-Z Screen 500XL Isuzu FRR w/Switch-n-Go John Deere CT 322 Turbo Turf 300E hydroseeder Harley Mx8H FFC Preparator
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
