Register free!

The Green Industry's Resource Center


Reply
 
Thread Tools   Display Modes
  #1  
Old 06-15-2012, 04:26 PM
nej_008 nej_008 is offline
LawnSite Member
 
Join Date: Jun 2012
Location: Paris MI
Posts: 1
Bobcat Mower Problems

I have a bobcat mower that the blades wont turn on. I have replaced the PTO switch, the clutch, and the relay. Does anyone else have any ideas?
Reply With Quote
  #2  
Old 06-15-2012, 05:37 PM
dutch1's Avatar
dutch1 dutch1 is online now
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,192
http://www.lawnsite.com/showthread.php?t=144040
Reply With Quote
  #3  
Old 06-15-2012, 07:32 PM
pugs pugs is online now
LawnSite Silver Member
 
Join Date: Jun 2006
Location: Southwest of Chicago
Posts: 2,768
Have you tried troubleshooting or just throwing parts at it?

Model number would be a good place to start.
Reply With Quote
  #4  
Old 06-24-2012, 11:14 PM
cbegap cbegap is offline
LawnSite Member
 
Join Date: Dec 2007
Location: White Plains, MD
Posts: 141
Is that the only symptom? Without knowing any more than this I'll take a go at it. 1. I'm going to assume you have checked continuity of the wiring harness to make sure that it is ok. 2. Assuming it is a Zero turn, under the seat on the left side toward the front, there are typically 3 relays and a safety control module. The relays are usually all the same so you can switch them around and see if it does anything differently. I would also clean out your fuse holders with electric cleaner stuff and make make sure nothing looks burnt or melted. Scag owners are all the time saying they have to replace their fuse holders. I have had a voltage regulator/rectifier go bad and not provide enough voltage to the system to run the clutch, but it would run the machine (on a Toro Proline). Depending on if other things would work/not work and in what scenario it may be the seat safety module, but I just don't have enough info.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:56 PM.

Page generated in 0.06531 seconds with 9 queries