Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 07-03-2012, 04:44 PM
Billsz28 Billsz28 is offline
LawnSite Member
 
Join Date: Jun 2012
Location: Doylestown, pennaylvania
Posts: 69
Exmark lazer z spindle assembly serial: 129,000

I have been on the phone with both stens and JThomas (large parts suppliers) and cannot find a complete spindle assembly for serial numbers under 150,000. I can find all of the internal parts minus the housing which is what I really need


You guys have any experience with finding this part? Or maybe know someone willing to sell a broken spindle assembly, as long as the HOUSING IS INTACT. Thanks

I mean it is available through exmark but the pricetag is absurd, something like $350 +
Posted via Mobile Device
Reply With Quote
  #2  
Old 07-03-2012, 06:51 PM
BKTP BKTP is offline
LawnSite Member
 
Join Date: Jun 2012
Location: Savannah, GA
Posts: 32
Agri supply worked for me

I busted a spindle on a lazer Z and found complete spindles ar agri supply
http://mower-blades.agrisupply.com/s...xmark%20&asug=
for $73 @ china bearings but the hub is fine and you can put decent bearings in it when you change them.

I think all the hubs are the same unit, the shaft is the difference between the different decks.
Reply With Quote
  #3  
Old 07-04-2012, 12:28 PM
Billsz28 Billsz28 is offline
LawnSite Member
 
Join Date: Jun 2012
Location: Doylestown, pennaylvania
Posts: 69
Quote:
Originally Posted by BKTP View Post
I busted a spindle on a lazer Z and found complete spindles ar agri supply
http://mower-blades.agrisupply.com/s...xmark%20&asug=
for $73 @ china bearings but the hub is fine and you can put decent bearings in it when you change them.
I think all the hubs are the same unit, the shaft is the difference between the different decks.

Thanks but no luck with that site. There are larger differences than just the shaft. I'll post the oem part number for the assembly tomorrow
Posted via Mobile Device
Reply With Quote
  #4  
Old 07-04-2012, 02:02 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,520
Exmark doesn't even list a 129,000 on their site ?
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #5  
Old 07-04-2012, 02:33 PM
Greg78's Avatar
Greg78 Greg78 is online now
LawnSite Bronze Member
 
Join Date: May 2008
Location: Southwest, FL
Posts: 1,928
Thats a 1996 serial #. The part # is eXmark 1-414315 (replaces 1-513186). $86.77 from partstree.com
Reply With Quote
  #6  
Old 07-06-2012, 04:40 PM
Billsz28 Billsz28 is offline
LawnSite Member
 
Join Date: Jun 2012
Location: Doylestown, pennaylvania
Posts: 69
Ok I'm at the shop now. The exact serial number on this lazer z 60" is 125,806. The spindles on the deck were made for only a few machines with serial numbers 102,000-130,000 says exmark. The oem part number for the complete cutter housing is 1-634-242 and I can't find it anywhere for a reasonable price.


At this point I'll be lucky to just find a housing. What a headache.
Posted via Mobile Device
Reply With Quote
  #7  
Old 07-06-2012, 06:13 PM
Greg78's Avatar
Greg78 Greg78 is online now
LawnSite Bronze Member
 
Join Date: May 2008
Location: Southwest, FL
Posts: 1,928
Quote:
Originally Posted by Billsz28 View Post
Ok I'm at the shop now. The exact serial number on this lazer z 60" is 125,806. The spindles on the deck were made for only a few machines with serial numbers 102,000-130,000 says exmark. The oem part number for the complete cutter housing is 1-634-242 and I can't find it anywhere for a reasonable price.


At this point I'll be lucky to just find a housing. What a headache.
Posted via Mobile Device
First I've heard of some special cutter housing. I have no problems getting them for my Lazer Z with a serial of 114,000.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:03 AM.

Page generated in 0.06983 seconds with 9 queries