The Green Industry's Resource Center

GMLC · #**401** 06-30-2012, 07:17 AM

I do normally change directions on this property, but can only find one pic. These stripes are at a 45 degree angle.

GMLC · #**402** 07-10-2012, 05:38 PM

Just a quick update on the stripe kit. As PSC mentioned earlier in this thread, for some reason the stripe kit gets better with some hours on it. I'm very happy with the stripe kit at this time and all is well with my 452!!

Soon I will be changing my hydro filters and oil as I approach 75 hours on my machine. I want to thank mtmower for putting the whole procedure in his thread!

GMLC · #**403** 07-20-2012, 03:46 PM

Just another cut quality pic.

JDGlandscape · #**404** 07-20-2012, 10:14 PM

Those lawns look awesome. Everything still going good with the mower?

GMLC · #**405** 07-21-2012, 08:02 PM

Quote:

Originally Posted by JDGlandscape

Those lawns look awesome. Everything still going good with the mower?

Yup all is well with the mower! Just need some rain...
Posted via Mobile Device

DZR · #**406** 07-24-2012, 10:12 AM

Hello everyone. This is my first post.

I have the Pro Turn 460 and love it. Thanks to everyone for all of the great information in this forum.

While checking the mower over the weekend I noticed that the rubber seat isolators were damaged. I did a quick search on the part number (p/n 07500213) and I found a service letter from Ariens/Gravely that describes the issue and a recommendation for the correct adjustment for the seat retainer threaded washer.

I thought this might be worth checking out - see the link below.

http://apache.ariens.com/manuals/L-2192.PDF

mtmower · #**407** 07-24-2012, 12:26 PM

Quote:

Originally Posted by DZR

Hello everyone. This is my first post.

I have the Pro Turn 460 and love it. Thanks to everyone for all of the great information in this forum.

While checking the mower over the weekend I noticed that the rubber seat isolators were damaged. I did a quick search on the part number (p/n 07500213) and I found a service letter from Ariens/Gravely that describes the issue and a recommendation for the correct adjustment for the seat retainer threaded washer.

I thought this might be worth checking out - see the link below.

http://apache.ariens.com/manuals/L-2192.PDF

Great info! Mine was originally set up too loose from factory and I have some pretty rough properties. When talking to my rep he recommended tightening them to take some of the slap out of the seat that can snowball if the property is rough enough. This also helps the seat to lean less when side hilling on steep slopes (20 degree

)

ProStreetCamaro · #**408** 07-24-2012, 09:25 PM

Quote:

Originally Posted by DZR

Hello everyone. This is my first post.

I have the Pro Turn 460 and love it. Thanks to everyone for all of the great information in this forum.

While checking the mower over the weekend I noticed that the rubber seat isolators were damaged. I did a quick search on the part number (p/n 07500213) and I found a service letter from Ariens/Gravely that describes the issue and a recommendation for the correct adjustment for the seat retainer threaded washer.

I thought this might be worth checking out - see the link below.

http://apache.ariens.com/manuals/L-2192.PDF

I had questioned the vibration I was getting from the seat while going up hills. The gravely rep on this site told me about that so I checked and sure enough mine nuts were barely on the threads. After adjusting them that solved that issue.

Ridin' Green · #**409** 07-24-2012, 11:44 PM

Quote:

Originally Posted by ProStreetCamaro

I had questioned the vibration I was getting from the seat while going up hills................... sure enough mine nuts were barely on the threads. After adjusting them that solved that issue.

Yea, I believe we all need to adjust every now and then for maximum comfort while mowing.

GMLC · #**410** 08-15-2012, 07:23 PM

Quote:

Originally Posted by GMLC

I do have to report the first problem with my 452. The hour meter went blank today! Went to my dealer and they ordered a new one.

I made this post on 6/22 when my hour meter went blank and went to my dealer, he ordered a new one under warranty. Needless to say he still doesn't have my hour meter!! I can order one from arienspartsdirect.com and have it on my doorstep in 2 days. Not a happy camper!! Same thing happened when I ordered factory blades and a stripe kit which I ended up ordering myself and had within two days as well. Took him over 4 weeks.