|
#1
|
|||
|
|||
|
Pump Issue
I am working on a system that had a booster pump but the pump was giving him problems and he eliminated it. The system needs the pump. The problem was that somehow exessive pressure was being created on the intake side and bulging the pipes. Oddly there was not exessive pressure on the output side. What would have caused this. I would post pics but this was several years ago.
|
|
#2
|
||||
|
||||
|
What kind of pipe(s) is it? I've seen air compressors get hot and cause ballooning close to blow out connections.
|
|
#3
|
||||
|
||||
|
Good point, which is why I never used anything but copper and brass for booster applications.
|
|
#4
|
||||
|
||||
|
Quote:
i posted a pic a few years ago about a swelled return pipe on a swimming pool. the throttle valve had been closed by the maintenance company and the pump dead headed. the water was hot enough to cook shrimp |
|
#5
|
|||
|
|||
|
Quote:
Deadheading sounds like a likely cause, just wondering why the pipe ballooned on the intake and not the output side? More heat at that point I guess. |
|
#6
|
||||
|
||||
|
Quote:
on the other hand the blowout theory is plausablePosted via Mobile Device |
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|
















Linear Mode
